In need of a little audio help

[grugattony]

And the audio response is still the same so far no green jack audio for computer speakers (2.1 ) no hdmi from the hd4000 hdmi cable to tv.

 

[rkwallace]

I'm having the same issue. If I can get a solution I will be sure to share with you.

 

[grugattony]

Please do so, although I know we are in good hands under Toleda's expert guidance here. It might be we need to solder the bard at this point but i'll refrain from that until further tests.

 

[toleda]

Attachments sorry

Rebuild cache, http://sourceforge.net/projects/dpcimanager/

- - - Updated - - -

I'm having the same issue. If I can get a solution I will be sure to share with you.

Completely different problems.

 

[grugattony]

I redid dsdt so new ioreg and dsdt provided


so do i still need to add buffers for hd4870?

 

[grugattony]

And finally HDMI sound work! Happy Happy joy joy joy...

Still the sound output for the 2.1 speakers is the black one and not the green one.

Ok what guide should I follow to set up an analog output for my 5.1 receiver?

 

[grugattony]

I have no kext enabler whatsoever (remove kext enabler1) applehda 4.2.7 by toleda alc898
repair permission and rebuild caches with dcpi manager (kext utility or wizard dont cut it)
redid my dsdt (start with dsdt=null) replced the dsdt in extra folder repair perm rebuild caches again and restart. Worked for me

The PJALM steps for the Z77X-UD5H are:
1. Gigabyte repo: Z77X-UD5H
2. Graphics repo: Generic Discrete Graphics (AMD/Nvidia) - Optional
3. Graphics repo: HD4000

nothing else

sound for rear speakers 2.0 is from black port. I'm checking to see if front audio works now too then will set up 5.1 out for analog receiver. if at all possible.

 

[grugattony]

Although it works noe, one weird thing is this is still in my dsdt

Note this error is in patchedDSDT.dsl
* iASL Warning: There were 6 external control methods found during
* disassembly, but additional ACPI tables to resolve these externals
* were not specified. This resulting disassembler output file may not
* compile because the disassembler did not know how many arguments
* to assign to these methods. To specify the tables needed to resolve
* external control method references, use the one of the following
* example iASL invocations:
* iasl -e <ssdt1.aml,ssdt2.aml...> -d <dsdt.aml>
* iasl -e <dsdt.aml,ssdt2.aml...> -d <ssdt1.aml>
*/


still working on the rest for now