iMac Pro X99 - Live the Future now with macOS 10.14 Mojave [Successful Build/Extended Guide]

[kgp]

Here you have it .

Thanks, man .. However, es expected, no improvement either..

 

[yuyu166]

here you go...

Hi KGP,
Thank you so much for your work. I placed SSDT-X99-Nvidia.aml, that you created for me, in EFI patched folder and restarted my mackintosh. Here is the screenshot of my system report. What to you think? Thank you so much.

 

[kgp]

Hi KGP,
Thank you so much for your work. I placed SSDT-X99-Nvidia.aml, that you created for me, in EFI patched folder and restarted my mackintosh. Here is the screenshot of my system report. What to you think? Thank you so much.

SSDT-X99-Nvidia.aml not properly adopted to your system and ignored during boot. Please perform a proper adaptation/implementation of SSDT-X99-Nvidia.aml. Did you use SSDT-DTPG.aml in line with SSDT-X99-Nvidia.aml?

 

[rabbit27]

Hello Guys,

Help please

I was running High sierra without any problem, but since I migrate to Mojave I have some issue when I use 2 softwares. The system looks stable but when I import a MP3 in premiere pro the software freeze and when I use also my software for 3d mapping by drone, and when I open my projects, the 3D maps are very very slow to move, like my graphic card is not exploited... All was fine just before the update. Before I fixed a similar issue with shiki but for now I don't understand...

My config :
i7-5820k
mobo : GA-x99-ud5
cg : hd7970-dc2-3gd5 asus

 

[kgp]

Hello Guys,

Help please

I was running High sierra without any problem, but since I migrate to Mojave I have some issue when I use 2 softwares. The system looks stable but when I import a MP3 in premiere pro the software freeze and when I use also my software for 3d mapping by drone, and when I open my projects, the 3D maps are very very slow to move, like my graphic card is not exploited... All was fine just before the update. Before I fixed a similar issue with shiki but for now I don't understand...

My config :
i7-5820k
mobo : GA-x99-ud5
cg : hd7970-dc2-3gd5 asus

View attachment 358942 View attachment 358944

I hope all guys familiar with Premiere are willing to help in your apparent issue.

Good luck,

KGP

 

[rabbit27]

I hope all guys familiar with Premiere are willing to help in your apparent issue.

Good luck,

KGP

Thanks KGP, do you think it is link with the powermanagment ? I made the test for the XCPM as you provide, and all return 1. Or do you have an idea where to start for debug or which layer can make this issue ?

 

[kgp]

Thanks KGP, do you think it is link with the powermanagment ? I made the test for the XCPM as you provide, and all return 1. Or do you have an idea where to start for debug or which layer can make this issue ?

No idea, i don’t use Premiere and I don’t think that your issue is related to our actual system configurarion. At least in terms of CPU performance I would totally exclude any relation with your current issue.

 

[rabbit27]

No idea, i don’t use Premiere and I don’t think that your issue is related to our actual system configurarion. At least in terms of CPU performance I would totally exclude any relation with your current issue.

Yes I think so too, my feeling is maybe an issue from graphic, or audio but mostly graphic (Nothing sure)

I read that someguys solved the probleme before by using a mac pro smbios 6,1. So I tried to revert to my mac pro 6,1 conf (because I was in this conf before the update) but the problem still here...

Ho yes...and the name of the 3d mapping is photoscan from Agisoft, if someone have an idea...

 

[nmano]

2018-10-19 09:09:53.729983-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.729979 XHC3@01000000: AppleUSBHostController::setPowerStateGated: going to state 2 failed with 0xe00002bc
2018-10-19 09:09:53.744128-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.744126 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000040
2018-10-19 09:09:53.744393-0400 0x36c      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.744389 XHC3@01000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
2018-10-19 09:09:53.767521-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767519 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2018-10-19 09:09:53.767737-0400 0x29a      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767734 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000004
2018-10-19 09:09:53.767947-0400 0x29a      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767945 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery

AppleUSBHostController Find and replace patch need this error.
I don't know how
0xe00002bc
BC 02 00 E0

0x00000040
40000000

0xe00002e9
E9 02 00 E0

 

[kgp]

2018-10-19 09:09:53.729983-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.729979 XHC3@01000000: AppleUSBHostController::setPowerStateGated: going to state 2 failed with 0xe00002bc
2018-10-19 09:09:53.744128-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.744126 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000040
2018-10-19 09:09:53.744393-0400 0x36c      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.744389 XHC3@01000000: AppleUSBHostController::setPowerStateGated: going to state 1 returned 0xe00002e9
2018-10-19 09:09:53.767521-0400 0x236      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767519 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery
2018-10-19 09:09:53.767737-0400 0x29a      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767734 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: 0x00000004
2018-10-19 09:09:53.767947-0400 0x29a      Default     0x0                  0      0    kernel: (IOUSBHostFamily) 000004.767945 XHC3@01000000: AppleUSBHostController::hardwareExceptionThreadCallGated: attempting recovery

AppleUSBHostController Find and replace patch need this error.
I don't know how
0xe00002bc
BC 02 00 E0

0x00000040
40000000

0xe00002e9
E9 02 00 E0

On the X99Gaming G1 Wifi/X58A UD7 with the GC-Titan Ridge? 3 KextToPatch entries to make USB-C work? Are these values to be used with Clover Configurator or values to be directly implemented in the config.plist with some text editor?