Contribute
Register

i7 & GA-X58-UD3R Rev.2 Overclock Settings

Status
Not open for further replies.
please, i need config for.

. i7 930 in 3.6 or 3.8
. my cooler is
http://www.corsair.com/hydro-series-h60-cpu-cooler.html

. ram is 2200 - used in 1600

please, config ok in i7 930 in 3.6 or 3.8 safe.

timing yes or no??

ram is
Cas Latency:
7

Voltage:
1.65V

Timing:
7-10-10-28-2N

thanks for this
 
jpa said:
please, i need config for.

. i7 930 in 3.6 or 3.8
. my cooler is
http://www.corsair.com/hydro-series-h60-cpu-cooler.html

. ram is 2200 - used in 1600

please, config ok in i7 930 in 3.6 or 3.8 safe.

timing yes or no??

ram is
Cas Latency:
7

Voltage:
1.65V

Timing:
7-10-10-28-2N

thanks for this
Click to expand...

Please read one of these guides:

http://www.techreaction.net/2010/09/07/ ... -gulftown/

http://www.overclockers.com/3-step-guid ... -i3-i5-i7/

No one can know what your best voltages/settings are unless they go through the steps listed in these or similar guides using YOUR SYSTEM.

It is not wise to be messing with these settings if you don't understand what you're doing; by asking for settings for your system you are demonstrating that you don't understand what you're doing.

This is why Intel and other companies (among other reasons) make it harder and harder to overclock all but their expensive, "unlocked" chips-- because people just plug stuff in and risk damaging their board or creating an unstable setup, and other people suggest that even less knowledgeable users replicate their own settings that happen to work (even if they are un-wise settings to use).
 
Mac Pro
GA-X58A-UD3R |  Xeon X5650 |  Radeon R9 290
justruss said:
jpa said:
please, i need config for.

. i7 930 in 3.6 or 3.8
. my cooler is
http://www.corsair.com/hydro-series-h60-cpu-cooler.html

. ram is 2200 - used in 1600

please, config ok in i7 930 in 3.6 or 3.8 safe.

timing yes or no??

ram is
Cas Latency:
7

Voltage:
1.65V

Timing:
7-10-10-28-2N

thanks for this
Click to expand...

Please read one of these guides:

http://www.techreaction.net/2010/09/07/ ... -gulftown/

http://www.overclockers.com/3-step-guid ... -i3-i5-i7/

No one can know what your best voltages/settings are unless they go through the steps listed in these or similar guides using YOUR SYSTEM.

It is not wise to be messing with these settings if you don't understand what you're doing; by asking for settings for your system you are demonstrating that you don't understand what you're doing.

This is why Intel and other companies (among other reasons) make it harder and harder to overclock all but their expensive, "unlocked" chips-- because people just plug stuff in and risk damaging their board or creating an unstable setup, and other people suggest that even less knowledgeable users replicate their own settings that happen to work (even if they are un-wise settings to use).
Click to expand...

thanks,

is OK this?

3.6Ghz

CPU clock ratio - 22

Base clock control enab enab enab enab

BCLK Frequency 172

Syst.Memo.Multip. 8.0
 
Your Uncore speed must MUST be at least double the speed of your ram so 2200Mhz ram means your uncore speed must MUST be at least 4400MHz.
 
spencerlievens said:
Your Uncore speed must MUST be at least double the speed of your ram so 2200Mhz ram means your uncore speed must MUST be at least 4400MHz.
Click to expand...

mmmm used my ram in 1600 mhz
 
After setting these settings, download IntelBurnTest and RealTempGT. Open both programs in windows and run 15 passes on High stress on IntelBurnTest and check temperatures on RealTempGT. You don't want temps going above 85 degrees.


Advanced frequency settings
CPU Clock Ratio 19X
CPU Frequency 4.18Ghz (220x19)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x20
Uncore frequency 4400Mhz

Base Clock Control Enabled
BCLK Frequency 220
XMP Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Disabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [7]
tRCD 8 [10]
tRP 8 [10]
tRAS 24 [28]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.2v
ICH I/O Auto
ICH Core 1.2v
DRAM Voltage 1.66v
DRAM Termination Auto
 
spencerlievens said:
After setting these settings, download IntelBurnTest and RealTempGT. Open both programs in windows and run 15 passes on High stress on IntelBurnTest and check temperatures on RealTempGT. You don't want temps going above 85 degrees.


Advanced frequency settings
CPU Clock Ratio 19X
CPU Frequency 4.18Ghz (220x19)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x20
Uncore frequency 4400Mhz

Base Clock Control Enabled
BCLK Frequency 220
XMP Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Disabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [7]
tRCD 8 [10]
tRP 8 [10]
tRAS 24 [28]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.2v
ICH I/O Auto
ICH Core 1.2v
DRAM Voltage 1.66v
DRAM Termination Auto
Click to expand...

thanks
there is no way I can use 3.6 or 3.8?
 
change multi to 16x and re-enable multithreading and turbo boost :)
 
spencerlievens said:
change multi to 16x and re-enable multithreading and turbo boost :)
Click to expand...

Works OK this??

Advanced frequency settings
CPU Clock Ratio 16X is 3.6 or 3.8? 17X is?
CPU Frequency ???
QPI Clock Ratio ???
QPI Link Speed ???
Uncore Clock Ratio ???
Uncore frequency ????

Base Clock Control Enabled
BCLK Frequency 220
XMP Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Enabled
CPU Cores Enabled All
CPU Multi-Threading Enabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [7]
tRCD 8 [10]
tRP 8 [10]
tRAS 24 [28]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.2v
ICH I/O Auto
ICH Core 1.2v
DRAM Voltage 1.66v
DRAM Termination Auto

Changes complete?? or send full instructions with changes

thanks
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top