i7 & GA-X58-UD3R Rev.2 Overclock Settings

[spencerlievens]

For i7 & 1600MHz Ram

Advanced frequency settings
CPU Clock Ratio 20X
CPU Frequency 4.10Ghz (205x20)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x16
Uncore frequency 3280Mhz

Base Clock Control Enabled
BCLK Frequency 205
XMP Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1640Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Enabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1640Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.315v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.2v
ICH I/O Auto
ICH Core Auto
DRAM Voltage 1.66v
DRAM Termination Auto

 

[spencerlievens]

For i7 & 1333MHz Ram

Advanced frequency settings
CPU Clock Ratio 22X
CPU Frequency 3.652Ghz (166x22)
QPI Clock Ratio x36
QPI Link Speed 5.976GHz
Uncore Clock Ratio x16
Uncore frequency 2656Mhz

Base Clock Control Enabled
BCLK Frequency 166
XMP Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1328Mhz
PCI Express Frequency 100
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Enabled
CPU Cores Enabled All
CPU Multi-Threading Enabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1328Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 1
CPU Vcore 1.3v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.315v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.2v
ICH I/O Auto
ICH Core 1.2v
DRAM Voltage 1.66v
DRAM Termination Auto

 

[justr]

What are you telling us here? Your settings?

They're nice to look at, but once you go beyond a moderate overclock with these chips (the upper boundary to which I would put at around 3.8 Ghz), each individual chip (not to mention mobo and ram) will need different voltage settings, multis, etc to get a stable + cool setting.

So people would be foolish to take your settings and just apply them to their identical setup-- for some your settings would probably fail, for others they may work (but they'll never know if they could be running a lower/cooler voltages).

 

[justr]

For instance, I have very similar settings (4.0 Ghz, but at 174 x 23), but I can achieve that at around 1.26 or 1.28 VCore, and 1.29-ish QPI/VTT.

 

[spencerlievens]

This is true but all my voltages are within safe boundaries and no offence to anyone but these are just starting points for noobs

 

[jpa]

thansk, please config for...

- 3.8 GHZ or 3.6 or recomendation?

my ram is
G.SKILL PIS Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 2200 (PC3 17600) Desktop Memory Model F3-17600CL7D-4GBPIS - 150 usd
http://www.newegg.com/Product/Product.a ... -_-Product

1600 MHZ in bios

timing
7-10-10-28-2N?? in bios??

Config safe please

 

[beelzebozo]

For i7 & 1600MHz Ram

Advanced frequency settings
CPU Clock Ratio 20X
CPU Frequency 4.10Ghz (205x20)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x16
Uncore frequency 3280Mhz

Base Clock Control Enabled
BCLK Frequency 205
XMP Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1640Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Enabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 8x
Memory Frequency 1640Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.315v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.355v (Or as close to)
ICH I/O Auto
ICH Core Auto
DRAM Voltage 1.66v
DRAM Termination Auto

Topic moved to forum, Overclocking.

 

[spencerlievens]

For i7 & 2200MHz Ram. Try these settings with your i7 930 and G.Skill, let me know how you get on and dont forget to run IntelBurnTest 15 times on High or Very High stress and watch temps on RealTempGT

Advanced frequency settings
CPU Clock Ratio 19X
CPU Frequency 4.18Ghz (220x19)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x20
Uncore frequency 4400Mhz

Base Clock Control Enabled
BCLK Frequency 220
XMP Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Disabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.36v
ICH I/O Auto
ICH Core 1.36v
DRAM Voltage 1.64v
DRAM Termination Auto

 

[spencerlievens]

If you have trouble its more than likely down to a high bclck so try these settings instead

Advanced frequency settings
CPU Clock Ratio 22X
CPU Frequency 4.026Ghz (183x22)
QPI Clock Ratio x36
QPI Link Speed 6.588GHz
Uncore Clock Ratio x24
Uncore frequency 4392Mhz

Base Clock Control Enabled
BCLK Frequency 183
XMP Disabled
System Memory Multiplier (SPD) 12x
Memory Frequency 2196Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Enabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 12x
Memory Frequency 2196Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.35v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.34v
ICH I/O Auto
ICH Core 1.34v
DRAM Voltage 1.66v
DRAM Termination Auto

 

[jpa]

For i7 & 2200MHz Ram. Try these settings with your i7 930 and G.Skill, let me know how you get on and dont forget to run IntelBurnTest 15 times on High or Very High stress and watch temps on RealTempGT

Advanced frequency settings
CPU Clock Ratio 19X
CPU Frequency 4.18Ghz (220x19)
QPI Clock Ratio x36
QPI Link Speed 3.6GHz
Uncore Clock Ratio x20
Uncore frequency 4400Mhz

Base Clock Control Enabled
BCLK Frequency 220
XMP Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
PCI Express Frequency 103
CPU Clock Drive 800mV
PCI Express Clock Drive 900mV
CPU Clock Skew 0
IOH Clock Skew 0

Advanced CPU Core Features
Intel Turbo Boost Tech Disabled
CPU Cores Enabled All
CPU Multi-Threading Disabled
CPU Enhanced Halt (C1E) Disabled
C3/C6/C7 State Support Disabled
CPU Thermal Monitor Disabled
CPU EIST Function Disabled
Bi-Directional PROCHOT Enabled

Advanced Memory Settings
Extreme Memory Profile (XMP) Disabled
System Memory Multiplier (SPD) 10x
Memory Frequency 2200Mhz
Performance Enhance Extreme
DRAM Timing Selectable (SPD) Quick
Profile DDR Voltage 1.5v
Profile QPI Voltage 1.175v
Channel Interleaving 6 Auto
Rank Interleaving 4 Auto

CAS Latency Time 8 [Set to match your Memory Latency Settings]
tRCD 8 [Set to match your Memory Latency Settings]
tRP 8 [Set to match your Memory Latency Settings]
tRAS 24 [Set to match your Memory Latency Settings]

Advanced Voltage Settings
Load-Line Calibration Level 2
CPU Vcore 1.350v
X Dynamic Vcore (DVID) Normal
QPI/Vtt Voltage 1.355v
CPU PLL 1.88
PCIE Normal
QPI PLL Normal
IOH Core 1.36v
ICH I/O Auto
ICH Core 1.36v
DRAM Voltage 1.64v
DRAM Termination Auto

please config in 1600mhz - 3.8ghz

timing works