i7-7700K kaby lake can not boot - stuck on ++++++++

[theroedogg]

Make sure to load UEFI boot loader

I used legacy by mistake and would give me (+++++++++)

 

[simplemal]

Attach ioreg as ZIP: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply with an ioreg from any other version of IORegistryExplorer.app.

Provide output (in Terminal):

kextstat|grep -y acpiplat
kextstat|grep -y appleintelcpu
kextstat|grep -y applelpc
kextstat|grep -y applehda

Attach EFI/Clover folder as ZIP (press F4 at main Clover screen before collecting). Please eliminate 'themes' directory. Provide only EFI/Clover, not the entire EFI folder.

Attach output of (in Terminal):

sudo touch /System/Library/Extensions && sudo kextcache -u /

Compress all files as ZIP. Do not use external links. Attach all files using site attachments only.

I hope that I doing well
See attachment and thank you so much RehabMan, really!

My configuration:
- Gigabyte Z170x Designare
- Intel i7-7700k
- Kingston HyperX Savage 32GB DDR4
- NVIDIA MSI GTX 980 Ti Gaming 6G
- Crucial MX300 (Hackintosh Boot)
- Patriot Hellfire 240GB M.2 (Windows Boot)

 

[RehabMan]

I hope that I doing well
See attachment and thank you so much RehabMan, really!

My configuration:
- Gigabyte Z170x Designare
- Intel i7-7700k
- Kingston HyperX Savage 32GB DDR4
- NVIDIA MSI GTX 980 Ti Gaming 6G
- Crucial MX300 (Hackintosh Boot)
- Patriot Hellfire 240GB M.2 (Windows Boot)

Your ioreg shows no Broadcom WiFi installed. No Broadcom WiFi on PCIe bus.

 

[simplemal]

But it is installed. If I boot with Windows, Wi-Fi and Bluetooth works perfectly.

BTW: I see many other errors in those report....

 

[RehabMan]

But it is installed. If I boot with Windows, Wi-Fi and Bluetooth works perfectly.

It is not shown under PCI0 in ioreg.
You might use F2 in Clover to generate preboot.log in CLOVER/misc/. Check if Clover sees the WiFi device when it scans PCI.

BTW: I see many other errors in those report....

Kexts are installed incorrectly...

FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.

 

[simplemal]

It is not shown under PCI0 in ioreg.
You might use F2 in Clover to generate preboot.log in CLOVER/misc/. Check if Clover sees the WiFi device when it scans PCI.

I don't see it... but my PCIe card uses also USB 9 pin on Mainboard (I don't know which is for power and which for data).
https://www.amazon.it/dp/B00MBP25UK/?tag=tonymacx86com-21
(preboot.log in attachment)

Kexts are installed incorrectly...

FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.
FakePCIID.kext has no Info.plist file.
FakePCIID_Intel_HD_Graphics.kext has no Info.plist file.

Yes I see....
But I don't know why!
I thinks the files are in the right place:
/Library/Extensions

I don't have info.plist... maybe is this wrong?
I wrote CPU/GPU information in config.plist

 

[RehabMan]

I don't see it... but my PCIe card uses also USB 9 pin on Mainboard (I don't know which is for power and which for data).
https://www.amazon.it/dp/B00MBP25UK/?tag=tonymacx86com-21
(preboot.log in attachment)

USB is for bluetooth. Not related to missing WiFi.

Yes I see....
But I don't know why!
I thinks the files are in the right place:
/Library/Extensions

I don't have info.plist... maybe is this wrong?
I wrote CPU/GPU information in config.plist

You corrupted the kexts before you installed them.
Maybe you should start over...

 

[simplemal]

ok, I used EasyKext now to reinstall and in kextcache the error is gone..
but these lines are correct?

kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext realtekALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_ACPISensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67013 0xFFFFFFFFFFFEFA3B for kext AppleMobileDevice.kext
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
Invalid signature -67061 for kext <OSKext 0x7fb45a861ac0 [0x10ee5cd80]> { URL = "VoodooHDA.kext/ -- file:///Library/Extensions/", ID = "org.voodoo.driver.VoodooHDA" }
KernelCache ID: 636815B45AAFD712D701A069D3A5FDFE
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>

 

[RehabMan]

ok, I used EasyKext now to reinstall and in kextcache the error is gone..
but these lines are correct?

kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext VoodooHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext realtekALC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC_ACPISensors.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67013 0xFFFFFFFFFFFEFA3B for kext AppleMobileDevice.kext
kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext
Invalid signature -67061 for kext <OSKext 0x7fb45a861ac0 [0x10ee5cd80]> { URL = "VoodooHDA.kext/ -- file:///Library/Extensions/", ID = "org.voodoo.driver.VoodooHDA" }
KernelCache ID: 636815B45AAFD712D701A069D3A5FDFE
symlink("/System/Library/PrelinkedKernels/prelinkedkernel", "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache") failed 17 (File exists) <createPrelinkedKernel 2795>

Looks fine.
You still need to address the issue of the WiFi device not showing on the PCIe bus.

 

[adar]

All I needed to do was fakecpuid set to 0x0506e3 and also I had to switch
OsxAptioFixDrv-64.efi switch from OsxAptioFixDrv2-64.efi
After that I was able to boot. Then it was working OK.
Now I'm testing same CPU on newer gigabyte motherboard Z270mx gaming 5 - so far everything works OK just USB 3.1 does not work now (it was working full speed on z170mx gaming 5) and audio (I understand that, since I will need new kexts for different codes stuff)
I would love to fix USB 3.1 to work on full speed! If NY body knows, let me know.
If you guys have z170mx I will did share my EFI above and just.ade the tweets @RehabMan was suggesting.
I can never let go I guess and now Z270mx is my next goal lol.

I also just bought the GA-Z270MX-Gaming 5 to use with my new i7-7700K! Did you use the same fakecpuid and OsxAptioFixDrv-64.efi to get it running? Is there anything else that you had to do?