- Joined
- Mar 10, 2017
- Messages
- 4
- Motherboard
- Z390
- CPU
- Intel I5
- Graphics
- GT 710 2 GB
Hello everyone, I'm facing a problem with a Hackintosh I built.
Specifications:
Intel Core i7 12700H
64GB DDR4 3200Mhz (32Gx2)
2Tb NVMe SSD
AMD Radeon RX 6600 8Gb
Wifi BCM94360CS with NVME Adapter
Sonoma 14.1.1
Open Core updated yesterday (0.9.6)
All kexts updated
I bought the pieces following a video I saw in the internet.
The installation starts and ends successfully but the system is extremely slow. The mouse keeps that little ball spinning all the time, it is practically impossible to use even if it is a high-specification computer.
I tried to observe if there were any changes in resource usage during these glitches and I didn't notice anything relevant. CPU and Memory remain low all the time. I upgraded to the Sonoma from scratch, and the problem persisted (initially, I had installed the Ventura).
I ran benchmark programs on the CPU and GPU to see if anything would fail and everything worked perfectly with high result numbers. But the system simply doesn't work as it should.
The problem is very generic, so I have no idea how to research to find a solution, and that's why I'm asking for help. Basically, for any simple operation such as copying and pasting text, opening system properties or "about this mac", typing, etc. the mouse always keeps in loading state for longer than expected.
Anyway, I have no idea how to solve it. If anyone can shed some light, I would appreciate it.
PS: The problem also occurred before the OpenCore and kexts update.
EFI I'm using follows attached
Specifications:
Intel Core i7 12700H
64GB DDR4 3200Mhz (32Gx2)
2Tb NVMe SSD
AMD Radeon RX 6600 8Gb
Wifi BCM94360CS with NVME Adapter
Sonoma 14.1.1
Open Core updated yesterday (0.9.6)
All kexts updated
I bought the pieces following a video I saw in the internet.
The installation starts and ends successfully but the system is extremely slow. The mouse keeps that little ball spinning all the time, it is practically impossible to use even if it is a high-specification computer.
I tried to observe if there were any changes in resource usage during these glitches and I didn't notice anything relevant. CPU and Memory remain low all the time. I upgraded to the Sonoma from scratch, and the problem persisted (initially, I had installed the Ventura).
I ran benchmark programs on the CPU and GPU to see if anything would fail and everything worked perfectly with high result numbers. But the system simply doesn't work as it should.
The problem is very generic, so I have no idea how to research to find a solution, and that's why I'm asking for help. Basically, for any simple operation such as copying and pasting text, opening system properties or "about this mac", typing, etc. the mouse always keeps in loading state for longer than expected.
Anyway, I have no idea how to solve it. If anyone can shed some light, I would appreciate it.
PS: The problem also occurred before the OpenCore and kexts update.
EFI I'm using follows attached