i5 2410m/sierra hackintosh

[Ziwi]

There is no disk1, so why are you trying to format it?
Is the 30GB disk2 the USB you plan to use?

I don't know why it's say disk2 but ont my desktop it's write disk1 and yes that the usb i want to use

 

[RehabMan]

I don't know why it's say disk2 but ont my desktop it's write disk1 and yes that the usb i want to use

There is no disk1 (according to your diskutil output).
You will need to decide for yourself whether you want to use disk2.
Remove the USB, then do "diskutil list" again to be certain you have the correct disk identifier (if disk2 goes away when it is removed, then you know it is the correct one).
Note the each time you insert the USB, it may end up with a different diskX identifier.
Pay attention to what you're doing.

 

[HD-MAICO-XR]

Well i stop here, it's to hard and i don't understand all.
Thank you for helping me

Hello I'm French too.

Part of the problem just the interface in French, so me I change to an English interface.

Certain values change with a copy/paste.

Take your time and follow the advice given you here.
The translation of the guides is not easy to do (to understand I use 3 machine translation engine, which gives me "3 different interpretation")

 

[Ziwi]

Tu est

Hello I'm French too.

Part of the problem just the interface in French, so me I change to an English interface.

Certain values change with a copy/paste.

Take your time and follow the advice given you here.
The translation of the guides is not easy to do (to understand I use 3 machine translation engine, which gives me "3 different interpretation")

Donc tu est français, tu aurai pas la possibilité de m'aider à comprendre?

 

[Ziwi]

There is no disk1 (according to your diskutil output).
You will need to decide for yourself whether you want to use disk2.
Remove the USB, then do "diskutil list" again to be certain you have the correct disk identifier (if disk2 goes away when it is removed, then you know it is the correct one).
Note the each time you insert the USB, it may end up with a different diskX identifier.
Pay attention to what you're doing.

Yes it's the disk2 i want to use

 

[Feartech]

Tu est

Donc tu est français, tu aurai pas la possibilité de m'aider à comprendre?

as per rules, English only please, thanks

 

[Ziwi]

as per rules, English only please, thanks

Oops sorry no problem^^

 

[Feartech]

Yes it's the disk2 i want to use

diskutil partitionDisk /dev/disk2 2 MBR FAT32 "CLOVER EFI" 200Mi HFS+J "install_osx" R

is what you need

 

[Ziwi]

diskutil partitionDisk /dev/disk2 2 MBR FAT32 "CLOVER EFI" 200Mi HFS+J "install_osx" R

is what you need

It's finally work thank you
Started partitioning on disk2
Unmounting disk
Creating the partition map
Waiting for the disks to reappear
Formatting disk2s1 as MS-DOS (FAT32) with name CLOVER EFI
512 bytes per physical sector
/dev/rdisk2s1: 403266 sectors in 403266 FAT32 clusters (512 bytes/cluster)
bps=512 spc=1 res=32 nft=2 mid=0xf8 spt=32 hds=32 hid=2 drv=0x80 bsec=409600 bspf=3151 rdcl=2 infs=1 bkbs=6
Mounting disk
Formatting disk2s2 as Mac OS Extended (Journaled) with name install_osx
Initialized /dev/rdisk2s2 as a 29 GB case-insensitive HFS Plus volume with a 8192k journal
Mounting disk
Finished partitioning on disk2
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *31.1 GB disk2
1: DOS_FAT_32 CLOVER EFI 209.7 MB disk2s1
2: Apple_HFS install_osx 30.9 GB disk2s2

 

[Ziwi]

I followed all the guide and i'm here