- Joined
- May 6, 2013
- Messages
- 10
- Motherboard
- Alienware X51 R2
- CPU
- Intel Core i7-4770 3.40GHz
- Graphics
- EVGA NVIDIA GeForce GTX 1060 6GB
- Mac
- Mobile Phone
Hey there,
I'm running 10.8.4 on a Gigabyte GA-H77M-D3H (rev 1.1 with F9 BIOS) board with an i3-3240 with HD 2500 graphics. The system has 8GB of DDR3-1600 RAM and I'm booting from a 120GB Toshiba SSD. For the most part the build has been successful... apart from enabling the HD2500. I'm using a DVI monitor and I'm aware of the lack of VGA not an issue.
Without any DSDT, I can boot and get 1024x768 video just fine.
I've tried using MaciASL + pjalm's repos for the correct Gigabyte patches and the HD 2500 patches. Changing the DSDT I can boot in safe mode (-x) and OS X recognises the HD 2500 and changes to the correct resolution (plus recognises my monitor model correctly)
I've also tried changing the EFI parameters in org.chameleon.Boot.plist as per this thread.
I've tried both with custom-DSDT and with just the EFI params in the chameleon bootloader. Both of these methods boot fine using -x but when booting normally with either setting I get the following on my display after the Apple logo and spinner:
While SSHing into the machine and checking system.log I can see lots of these:
Any ideas? I've tried 32M, 64M, 96M, 256M for IGPU memory in the BIOS and nothing changes. I'd rather not purchase a separate GPU as this machine is only a fileserver/media PC.
Attached are original board DSDT, patched DSDT, chameleon boot & smbios files. Any help appreciated
Thanks in advance
I'm running 10.8.4 on a Gigabyte GA-H77M-D3H (rev 1.1 with F9 BIOS) board with an i3-3240 with HD 2500 graphics. The system has 8GB of DDR3-1600 RAM and I'm booting from a 120GB Toshiba SSD. For the most part the build has been successful... apart from enabling the HD2500. I'm using a DVI monitor and I'm aware of the lack of VGA not an issue.
Without any DSDT, I can boot and get 1024x768 video just fine.
I've tried using MaciASL + pjalm's repos for the correct Gigabyte patches and the HD 2500 patches. Changing the DSDT I can boot in safe mode (-x) and OS X recognises the HD 2500 and changes to the correct resolution (plus recognises my monitor model correctly)
I've also tried changing the EFI parameters in org.chameleon.Boot.plist as per this thread.
I've tried both with custom-DSDT and with just the EFI params in the chameleon bootloader. Both of these methods boot fine using -x but when booting normally with either setting I get the following on my display after the Apple logo and spinner:
While SSHing into the machine and checking system.log I can see lots of these:
Code:
stampWait: Overflowed checking for stamp 0x21 on MAIN ring: called from sleepForTimeStamp timestamp = 0x0008
GPU hang:
Trying restart GPU ...
MAIN ring is NOT waiting on an event
stampWait: Overflowed checking for stamp 0x49 on MAIN ring: called from sleepForTimeStamp
timestamp = 0x0030
GPU hang:
Trying restart GPU ...
MAIN ring is NOT waiting on an event
Any ideas? I've tried 32M, 64M, 96M, 256M for IGPU memory in the BIOS and nothing changes. I'd rather not purchase a separate GPU as this machine is only a fileserver/media PC.
Attached are original board DSDT, patched DSDT, chameleon boot & smbios files. Any help appreciated
Thanks in advance