I need Help for install Mac OS with Clover on Acer Aspire E5-774G-57ND

[Trackhe]

i have read and follow it but. it dont works.

 

[Feartech]

i have read and follow it but. it dont works.

no, i don't think you did follow it as proof from the config.plist you have in your EFI

download a suitable one matching your hardware and try that

 

[Trackhe]

so i have used a config from there.
but the same problem i upload them.

a suitable one? where? i m to stupid to read it officially

i used https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD615_620_630_640_650.plist
but same error

 

[RehabMan]

so i have used a config from there.
but the same problem i upload them.

a suitable one? where? i m to stupid to read it officially

i used https://github.com/RehabMan/OS-X-Clover-Laptop-Config/blob/master/config_HD615_620_630_640_650.plist
but same error

"Problem Reporting" files are incomplete (no EFI/Clover attached)
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[Trackhe]

here is the clover i use actually.

 

[RehabMan]

here is the clover i use actually.

You need to read the guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

SATA-100-series-unsupported.kext is missing in Clover/kexts/Other
FakeSMC sensor kexts should not be present in Clover/kexts/Other
FakePCIID kexts not needed, remove.
Try first without USBInjectAll.kext

Guide recommends AptioMemoryFix.efi over OsxAptioFixDrv-64.efi. And if you read the guide carefully, you'll discover that OsxAptioFixDrv-64.efi generally requires EmuVariableUefi-64.efi (with your hardware).

Dual-GPU will also likely requre SSDT-DiscreteSpoof.aml (link provided in main guide).

 

[Trackhe]

okey thanks i try that.

 

[Trackhe]

i didn't find the SSTD-DiscreteSpoof.aml
i tryed your instructions without the aml and the same result.

 

[Feartech]

i didn't find the SSTD-DiscreteSpoof.aml

you will have to make it:
https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/

 

[RehabMan]

i didn't find the SSTD-DiscreteSpoof.aml

It is something you will need to create.
The guide is linked from the main Clover guide:

A note regarding High Sierra and dual-GPU laptops (Nvidia Optimus)

Keep in mind that you will probably need to keep the Nvidia drivers from loading.

Read here for details:
https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/

Get used to reading carefully. There is a lot of important information you must absorb.