RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,011
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Posting files as requested.
ACPI is not patched correctly. The guide is very clear on the fact that dynamic SSDTs should not be included in ACPI/patched. For some reason, you have placed all dynamic SSDTs in ACPI/patched...
Also, IGPU PM is not implemented (need GFX0->IGPU rename).
I can't do any further investigation because your files in ACPI/origin are corrupt:
Code:
Input file DSDT.aml, Length 0x1E2EE (123630) bytes
ACPI BIOS Warning (bug): Incorrect checksum in table [DSDT] - 0x0A, should be 0xE5 (20160522/tbprint-301)
Please re-extract, re-attach.
Also, all kexts should be installed to the system volume.
Could be a USB problem. Your USB setup is not correct... You should not inject ports that aren't used, and you should make sure UsbConnector is set correctly for each port you do inject.
See USB guide: http://www.tonymacx86.com/threads/guide-10-11-usb-changes-and-solutions.173616/
Also, further questions/posts should be in the El Capitan Laptop Support forum. The ioreg shows 10.11.4 installed, not Yosemite.
There might be an "instant wake" problem also... you did not patch for it (_PRW patch).
Also..
Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)
Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution
For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768
Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"