I think for your HP Probook 450G1, the install with Clover will be like this:
1. Step 1 to 10 in
http://www.tonymacx86.com/hp-probook-mavericks/112383-guide-install-mavericks-clover-bootloader.html
2. Clover bootloader screen shows up,
press F4 (to dump DSDT, SSDT...), then select "Boot OS X from YourPartition".
3. Step 12 to 15
4. Clover installer will automatically mount your EFI partition and copy Clover bootloader files there. Go to /EFI/Clover/ACPI/origin/ (of your Clover USB) , copy all DSDT.aml and SSDT*.aml to DSDT folder on desktop. Download latest iasl
here, copy iasl into the same folder. Open terminal and type this:
Code:
cd ~/Desktop/DSDT/
./iasl -da *.aml
5. Download MacIASL, go to Preferences > Sources, add those respority to MacIASL:
HP Probook:
http://raw.github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch/master
Laptop patches:
http://raw.github.com/RehabMan/Laptop-DSDT-Patch/master
Then use MacIASL to open DSDT.dsl from DSDT folder in desktop, click Patch and select these patches, click apply for each:
[1.2] Probook 4x40s IvyBridge
[3.3] Fan and Temps (reading only)
[2.10] Brightness fix (Haswell)
Copy the content of these patches then apply:
For 1366x768:
Code:
into definitionblock code_regex External\s+\(_SB_\.ISCT\) remove_matched;
into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
Return (Package()\n
{\n
"AAPL,ig-platform-id", Buffer() { 0x06, 0x00, 0x26, 0x0a },\n
"hda-gfx", Buffer() { "onboard-1" },\n
})\n
}\n
end;
For 1600x900+:
Code:
into definitionblock code_regex External\s+\(_SB_\.ISCT\) remove_matched;
into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
Return (Package()\n
{\n
"AAPL,ig-platform-id", Buffer() { 0x06, 0x00, 0x26, 0x0a },\n
"hda-gfx", Buffer() { "onboard-1" },\n
"AAPL00,DualLink", Buffer() { 0x01, 0x00, 0x00, 0x00 },\n
})\n
}\n
end;
Change your DSDT header as follows
From: DefinitionBlock ("dsdt.aml", "DSDT", 2, "HPQOEM", "1942 ", 0x00000001)
To: DefinitionBlock ("dsdt.aml", "DSDT", 2, "HPQOEM", "179C ", 0x00000001)
Click Compile to check if there is no error, save the file with format ACPI Machine Language Binary to /EFI/Clover/ACPI/patched/DSDT.aml (of EFI Partition).
6. Copy /Extra/SSDT.aml (You have to select SSDT-Generator in PBI) to /EFI/Clover/ACPI/patched/ (of EFI Partition).
7.
[FOR AMD GRAPHICS ONLY] Use MacIASL to open ssdt-6.dsl (You can see "AMDSGTBL" in Definition Block), click Patch and select
[5.1] Call _OFF from _INI
Apply, click Compile to check if there is no error, save the file with format ACPI Machine Language Binary to /EFI/Clover/ACPI/patched/SSDT-1.aml (of EFI Partition).
8.
[FOR AMD GRAPHICS ONLY] Copy SSDT5.aml (You can see "SaSSDT" in Definition Block) in ~/Desktop/DSDT/ to /EFI/Clover/ACPI/patched/ (of EFI Partition), rename it to SSDT-2.aml.
9. Remove GenericUSBXHCI kext from system/library/extensions
10. Copy config.plist from USB to /EFI/Clover/.
Copy HFSPlus.efi and HPFanReset.efi in /EFI/CLOVER/drivers64UEFI/ from your USB to /EFI/CLOVER/drivers64UEFI/ in EFI partition, remove VBoxHfs-64.efi
11. Use Clover Configurator here:
http://www.osx86.net/files/file/49-clover-configurator/ to edit some values in your config.plist:
- ACPI > Drop tables: Remove two SSDT items.
- ACPI > DropOEM: check, GeneratePStates/CStates: uncheck
- Gui > Theme: set your theme name
- SMBIOS: create your new SMBIOS with random Serial Number
12. Recheck if config.plist, dsdt.aml, ssdt.aml, ssdt-1.aml, ssdt-2.aml are placed correctly in EFI partition of internal drive.
13. Restart, you should see Clover screen and option to boot to Mavericks. Enjoy!
14. If you have trouble after sleep, open config.plist with CC, go to Kernel and Kext Patches and add these to Kexts to Patch:
Name: AppleUSBXHCI
Find: C680C800000001
Replace: C680C800000000