Contribute
Register

[HOW TO] Wi-Fi 6 Intel AX210 on macOS Sonoma

Try booting with BlueToolFixup.kext disabled in your config.plist.
Nothing! Same result

Screenshot 2023-11-27 alle 20.34.50.png
 
Did you use the ResetNvramEntry driver from the OC boot screen before booting in to macOS?
 
Of course. I'm doing an NVRAM reset from the OC boot screen at every reboot during my test
 
OK, just checking.

What device are you using to check if the Bluetooth works or not, i.e. Headphones, Speaker, mouse/keyboard?
 
Mouse bluetooth 5.0 Xiaomi
 
@Edhawk and others

I have the 3 BT kexts:
  1. IntelBluetoothFirmware.kext
  2. IntelBTPatcher.kext
  3. BlueToolFixup.kext
BT looks working but System Profiler >> Bluetooth >> Chipset says THIRD_PARTY_DONGLE. Do you have any idea about it? Because I saw that your BT has a specific chipset name.
That same display name is also on my test build. No idea (so far) where that comes from.
 
That same display name is also on my test build. No idea (so far) where that comes from.
I guess it's cosmetic although annoying. OpenIntelWireless BT kexts spoof BT as Broadcom. In this way, there are chipset names well detected. Others, as ours, are not.
 
@miliuco Just installed another Intel AX WiFi/BT card in a Hack. This was my Asus ROG Strix X570-F Gaming system, running Windows 11 and macOS Ventura Sonoma.

The Intel card was an AX200 WiFi/BT M.2 mounted on a PCIe adapter, installed in to a PCIe x1 slot with the Bluetooth module connected by cable to a motherboard USB2 header port.


I used exactly the same process as set out in post #1 and everything works as expected.
 
Last edited:
@Edhawk I installed another Intel AX210 card and so far the wifi and BT services are working well. Here is the link to the card in Amazon

EDUP PCIE WiFi 6E Card AX210 Bluetooth 5.2 AX5400M 802.11ax Tri-Band 6G/5.8G/2.4GHz Heat Sink 6dBi Antenna PCI-E Wireless Network Cards for Desktop PC Support Windows 11/10 64-bit https://www.amazon.com/dp/B08519ST43?tag=tonymacx86com-20
 
Last edited:
Back
Top