- Joined
- Apr 15, 2014
- Messages
- 15
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i9-9900K
- Graphics
- RX 6900 XT
- Mac
- Mobile Phone
Dear Forum,
running Monterey 12.1 on my z390 designare with i9-9900K dual boot with windows 11.
although as of 12.1 it was mentioned the 6000 is native supported this apparently does not count for the XTXH version.
looked at replace the bios by XTX version but this is not possible due XTXH and XTX use a different CHIP and would break the GPU.
there is already talked a lot about everywhere but could not find a clear example that will allow successful spoofing the 0x73af into 0x73bf
at this moment the Monterey is working quite good so looks some support is working but the 6900 is showed as "AMD Radeon Navi21 16 GB"
Geekbench does not see the graphic card.
regards,
rob
running Monterey 12.1 on my z390 designare with i9-9900K dual boot with windows 11.
although as of 12.1 it was mentioned the 6000 is native supported this apparently does not count for the XTXH version.
looked at replace the bios by XTX version but this is not possible due XTXH and XTX use a different CHIP and would break the GPU.
there is already talked a lot about everywhere but could not find a clear example that will allow successful spoofing the 0x73af into 0x73bf
at this moment the Monterey is working quite good so looks some support is working but the 6900 is showed as "AMD Radeon Navi21 16 GB"
Geekbench does not see the graphic card.
regards,
rob