- Joined
- Aug 19, 2016
- Messages
- 460
- Motherboard
- ASUS Prime X299 Deluxe
- CPU
- i9-7900X
- Graphics
- Vega 64
- Mac
- Classic Mac
- Mobile Phone
Maybe we can really cook down all your problems to the Vega 64... isn’t it natively supported by macOS High Sierra 10.13?
The -turbo 4500 flag with ssdtPRGen.sh would result in an OC of your processor. However it would only apply, if you also change the cpu clock ratio in your Bios from 43 to 45 ... in any case if you perform OC, carefully watch the CPU temperatures!!!!
Good luck, man!!!
Cheers,
KGP
AppleIntelInfo.kext v2.9 Copyright © 2012-2017 Pike R. Alpha. All rights reserved.
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0x3f1935c7058 (131 MHz)
MWAIT C-States...........................: 8224
Processor Brandstring....................: Intel(R) Core(TM) i9-7900X CPU @ 3.30GHz
Processor Signature..................... : 0x50654
------------------------------------------
- Family............................... : 6
- Stepping............................. : 4
- Model................................ : 0x55 (85)
Model Specific Registers (MSRs)
------------------------------------------
MSR_IA32_PLATFORM_ID.............(0x17) : 0x8000000000000
------------------------------------------
- Processor Flags...................... : 2
MSR_CORE_THREAD_COUNT............(0x35) : 0xA0014
------------------------------------------
- Core Count........................... : 10
- Thread Count......................... : 20
MSR_PLATFORM_INFO................(0xCE) : 0x70C2CF3012100
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x21 (3300 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 0 (LMP not supported)
- Number of ConfigTDP Levels........... : 2 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 7
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2) : 0x8402
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 1 (MSR locked until next reset)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)
MSR_PMG_IO_CAPTURE_BASE..........(0xE4) : 0x11814
------------------------------------------
- LVL_2 Base Address................... : 0x1814
- C-state Range........................ : 1 (C6 is the max C-State to include)
IA32_MPERF.......................(0xE7) : 0x95C7369C07
IA32_APERF.......................(0xE8) : 0x4F4A834194
MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------
MSR_IA32_PERF_STATUS.............(0x198) : 0x16AE00000C00
------------------------------------------
- Current Performance State Value...... : 0xC00 (1200 MHz)
MSR_IA32_PERF_CONTROL............(0x199) : 0xC00
------------------------------------------
- Target performance State Value....... : 0xC00 (1200 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)
IA32_CLOCK_MODULATION............(0x19A) : 0x0
IA32_THERM_INTERRUPT.............(0x19B) : 0x0
IA32_THERM_STATUS................(0x19C) : 0x884A0000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 74
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)
MSR_THERM2_CTL...................(0x19D) : 0x0
IA32_MISC_ENABLES................(0x1A0) : 0x850089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 1 (enabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)
MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x690A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 105
- TCC Activation Offset................ : 0
MSR_MISC_PWR_MGMT................(0x1AA) : 0x403040
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)
- SpeedShift Technology Enable......... : 1 (enabled)
- SpeedShift Interrupt Coordination.... : 0 (disabled)
- SpeedShift Energy Efficient Perf..... : 1 (enabled)
- SpeedShift Technology Setup for HWP.. : Yes (setup for HWP)
MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2121212121212121
------------------------------------------
- Maximum Ratio Limit for C01.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C02.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C03.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C04.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C05.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C06.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C07.......... : 21 (3300 MHz)
- Maximum Ratio Limit for C08.......... : 21 (3300 MHz)
MSR_TURBO_RATIO_LIMIT1...........(0x1AE) : 0x1C1814100A080402
------------------------------------------
- Maximum Ratio Limit for C09.......... : 2 (200 MHz)
- Maximum Ratio Limit for C10.......... : 4 (400 MHz)
IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x1
------------------------------------------
- Power Policy Preference...............: 1 (highest performance)
MSR_POWER_CTL....................(0x1FC) : 0x292C005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)
MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)
MSR_PKG_POWER_LIMIT..............(0x610) : 0x3FFF80014FFF8
------------------------------------------
- Package Power Limit #1............... : 4095 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 0 (disabled)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 4095 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 1 (5 milli-Seconds)
- Lock................................. : 0 (MSR not locked)
MSR_PKG_ENERGY_STATUS............(0x611) : 0x1708314
------------------------------------------
- Total Energy Consumed................ : 1474 Joules (Watt = Joules / seconds)
MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x21
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xE4000000190460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xE4000000190460
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x80000000
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xC33F80A702
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0xC33F80A702
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0xCCF1D84463
IA32_TSC_DEADLINE................(0x6E0) : 0x3F199D8C223
IA32_PM_ENABLE...................(0x770) : 0x1 (HWP Supported and Enabled)
IA32_HWP_CAPABILITIES............(0x771) : 0x70C2121
-----------------------------------------
- Highest Performance.................. : 33
- Guaranteed Performance............... : 33
- Most Efficient Performance........... : 12
- Lowest Performance................... : 7
IA32_HWP_REQUEST_PKG.............(0x772) : 0x8000FF00
-----------------------------------------
- Minimum Performance.................. : 0
- Maximum Performance.................. : 255
- Desired Performance.................. : 0
- Energy Efficient Performance......... : 128
- Activity Window...................... : 0, 0
IA32_HWP_REQUEST................(0x774) : 0x8000FF00
-----------------------------------------
- Minimum Performance................. : 0
- Maximum Performance................. : 255
- Desired Performance................. : 0
- Energy Efficient Performance........ : 128
- Activity Window..................... : 0, 0
- Package Control..................... : 0
IA32_HWP_STATUS..................(0x777) : 0x0
-----------------------------------------
- Guaranteed Performance Change....... : 0 (has not occured)
- Excursion To Minimum................ : 0 (has not occured)
CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 33 (3300 MHz)
Maximum Turbo Ratio/Frequency............: 33 (3300 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 17 ]
CPU C6-Cores [ 1 2 4 6 9 10 13 15 17 18 ]
CPU P-States [ (12) 17 ]
CPU C6-Cores [ 0 1 2 3 4 6 9 10 13 15 16 17 18 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 ]
Last time I had more P-States but I think it's not a problem
because I will rebuild ssdt later....
and even with more states it was the same effect....
About SSDT, yes before it was 4500 when I was thinking and trying OC
but today I don't want to OC, I will do it in 6-8 months when I will
buy all WC blocks, new case, fans, radiators etc etc
About Vega - yes I think my unstable system it's something wrong with Vega drivers or configuration..
I have to find more people with Vega on 10.13 and talk about their config..
PS: I forgot to upload EFI
PS2: Have you iMessage working OK?
because I followed all guides and your advices
about EmuVariable on local drive but no on USB drive
then I tried with (a lot of) serials good serial numbers (clean)
and even I tried with new Apple account ....
The same message with 3 installations and a lot of different configurations
and of course few different guides...