High Sierra 10.13.3 fresh instal on ga-z87x-ud3h (fail)

[Gigamaxx]

They mentioned it isn't in the system, that card will end up at screenlockstate...... cmn699 mentioned incompatibility issue earlier.

 

[kurczaknz]

I just noticed that he has a GTX 660 Ti, i sense that this is not going to end well.

But im trying to install os without gtx.. there are few guys on te forum who has rig like mine (mb + cpu) and they manage to instal os with no problem.

 

[P1LGRIM]

They mentioned it isn't in the system, that card will end up at screenlockstate...... cmn699 mentioned incompatibility issue earlier.

Phew, there is still hope then.

 

[Gigamaxx]

But im trying to install os without gtx.. there are few guys on te forum who has rig like mine (mb + cpu) and they manage to instal os with no problem.

You will get there just keep trying, your systems is good you just need to figure out the correct settings.

 

[cmn699]

But im trying to install os without gtx.. there are few guys on te forum who has rig like mine (mb + cpu) and they manage to instal os with no problem.

• Your MoBo and CPU and its integrated Graphics are OK for macOS High Sierra.
• Make sure your Installer file is flawless and you have created the USB installer without any errors.
• Go through all BIOS options with a fine tooth comb to assure the correctly created UEFI USB installer as Option #1 in the Boot Option Priorities with any and all other Devices DISABLED , all the USB controllers are ENABLED to make it easier for the USB flash disk to get Power through out the installation, the Intel Processor Graphics alone ENABLED as initial Graphics Display option and the optimum DVMT Pre-Allocated Memory of 128M set aside for it in the BIOS and
• The CLOVER in the USB installer is set to use the Intel HD Graphics 4600 with proper editing of CLOVER/kexts/Other and config.plist _Devices_FakeID _IntelGFX set at 0x04128086 and the Graphics section showing [√]InjectIntel and ig-plartform-id =0xD2200003.
• The only proper way to boot a system until it is properly working with its own bootloader is using Verbose boot flag.
  • Using Apple logo Gui booting and reporting to the Forum in percentage of its progress or lack there of, is like walking blind folded on a strange street and asking for help to the destination.