Help with new High Sierra Install

[jrgarrett]

I am setting up a new High Sierra install and am running into problems. Here is what I have done to date:

Set Bios to recommended settings, display to PEG and connected dual monitors to GTX 1060

Used Unibeast 10.1.1 to create install media for OS X 10.13.1

Used Multibeast with he following:
Drivers > Misc > FakeSMC
Drivers > Network > Intel > IntelMausiEthernet v2.3.0
Drivers > USB > Increase Max Port Limit 200 Series
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customize > System Definitions > iMac > iMac 18,3
Drivers > Graphics > NVIDIA Web Drivers Boot Flag
Installed Nvidia web drivers fro 10.13.1

Removed Usb thumb drive and booted into system

Used Multibeast to install:
Drivers > Audio > Universal > VoodooHDA v2.9.0d10

Everything seems to work (dual monitors, sleep/wake, audio). Rebooted multiple times without issue

Opened Clover Configurator to make some changes suggested in similar builds. The first one I added was
DSDT patch - Rename SAT0 to SATA

Rebooted and the system would not load. I then used my Unibeast install media to boot into the system and Clover configurator to remove the DSDT patch. When I rebooted the system still would not load. Here is the boot screen:

View media item 189663
I would appreciate it if someone could give me a clue as to why I can't back out of this change an/or why it is failing to boot.

Thanks ,

 

[jrgarrett]

Replying to my own post. Noticed that Unibeast enabled virtually all of the DSDT Fixes. Once I unchecked all of these everything worked as expected. Not sure why/if this default behavior but wanted to note it in case someone else has this issue.