- Joined
- Jul 24, 2017
- Messages
- 4
- Motherboard
- ?
- CPU
- ?
- Graphics
- ?
- Mac
- Mobile Phone
I am setting up a new High Sierra install and am running into problems. Here is what I have done to date:
Set Bios to recommended settings, display to PEG and connected dual monitors to GTX 1060
Used Unibeast 10.1.1 to create install media for OS X 10.13.1
Used Multibeast with he following:
Drivers > Misc > FakeSMC
Drivers > Network > Intel > IntelMausiEthernet v2.3.0
Drivers > USB > Increase Max Port Limit 200 Series
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customize > System Definitions > iMac > iMac 18,3
Drivers > Graphics > NVIDIA Web Drivers Boot Flag
Installed Nvidia web drivers fro 10.13.1
Removed Usb thumb drive and booted into system
Used Multibeast to install:
Drivers > Audio > Universal > VoodooHDA v2.9.0d10
Everything seems to work (dual monitors, sleep/wake, audio). Rebooted multiple times without issue
Opened Clover Configurator to make some changes suggested in similar builds. The first one I added was
DSDT patch - Rename SAT0 to SATA
Rebooted and the system would not load. I then used my Unibeast install media to boot into the system and Clover configurator to remove the DSDT patch. When I rebooted the system still would not load. Here is the boot screen:
View media item 189663
I would appreciate it if someone could give me a clue as to why I can't back out of this change an/or why it is failing to boot.
Thanks ,
Set Bios to recommended settings, display to PEG and connected dual monitors to GTX 1060
Used Unibeast 10.1.1 to create install media for OS X 10.13.1
Used Multibeast with he following:
Drivers > Misc > FakeSMC
Drivers > Network > Intel > IntelMausiEthernet v2.3.0
Drivers > USB > Increase Max Port Limit 200 Series
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customize > System Definitions > iMac > iMac 18,3
Drivers > Graphics > NVIDIA Web Drivers Boot Flag
Installed Nvidia web drivers fro 10.13.1
Removed Usb thumb drive and booted into system
Used Multibeast to install:
Drivers > Audio > Universal > VoodooHDA v2.9.0d10
Everything seems to work (dual monitors, sleep/wake, audio). Rebooted multiple times without issue
Opened Clover Configurator to make some changes suggested in similar builds. The first one I added was
DSDT patch - Rename SAT0 to SATA
Rebooted and the system would not load. I then used my Unibeast install media to boot into the system and Clover configurator to remove the DSDT patch. When I rebooted the system still would not load. Here is the boot screen:
View media item 189663
I would appreciate it if someone could give me a clue as to why I can't back out of this change an/or why it is failing to boot.
Thanks ,