- Joined
- Oct 2, 2012
- Messages
- 7
- Motherboard
- Fujitsu LifeBook S752
- CPU
- I5-3230M / HM76
- Graphics
- Intel 4000HD / 1366x768
- Mac
- Classic Mac
- Mobile Phone
Yes, thanks. Done
---------------------
Hardware of the Fujitsu Lifebook S752
I will comment my installation process, if can be useful for anyone whit this laptop.
Thanks to RehabMAn !!!
- I create a USB with OSX 10.9.1 with Unibeast and laptop support. On a Virtual machine of Mavericks.
- Enter on BIOS (F2), and disable secure boot (you need to put a master password on the BIOS), disable virtualization, and Wake on LAN. Put the boot order correct, usually USB-HDD on top.
- With the Help of: http://www.tonymacx86.com/hp-probook-mavericks/112380-guide-installing-mavericks-hp-probook.html
I get the flags for boot with a Intel 4000HD
The flags are = IGPEnable=Yes IGPlatformID=01660003
- Boot, with the flags (in a USB2 port, not USB3) Follow the installer and format the disk as you want with a GUID partition map. But almost need one formatted as "Mac OS Extended (Journaled)".
- Follow the installer, and when finish. Reboot with the usb, but select the new disk. And use the flags. Finish the installation, and you get the desktop.
Using this tuto: http://www.tonymacx86.com/mavericks-laptop-support/111243-power-management-sandy-bridge-ivy-bridge-laptops.html
- Run Multibeast last version. Mine is 6.2.1. And select this options.
- For the Probook Installer 6.1.13r3.pkg, i install SSDT Generator, and the Tool "Chameleon Wizzard".
- At this moment the system should can install, but (for me) i need to correct the boot. Like this tutorial http://www.tonymacx86.com/25-boot0-error-official-guide.html .
- When Follow the tuto, the system works. And i change the /extra/smbios.plist to change the model to "MacBookPro9,2". And put the boot flags in /extra/org.chameleon.Boot.plist
- I Installed an RT2870 USB to have wifi.
At this moment a lot of this works. I will keep updating this post
---------------------
Hardware of the Fujitsu Lifebook S752
Code:
[FONT=arial]~$ lspci[/FONT]
[FONT=arial]00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)[/FONT]
[FONT=arial]00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)[/FONT]
[FONT=arial]00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)[/FONT]
[FONT=arial]00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)[/FONT]
[FONT=arial]00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)[/FONT]
[FONT=arial]00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)[/FONT]
[FONT=arial]00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)[/FONT]
[FONT=arial]00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)[/FONT]
[FONT=arial]00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)[/FONT]
[FONT=arial]00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)[/FONT]
[FONT=arial]00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)[/FONT]
[FONT=arial]00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)[/FONT]
[FONT=arial]00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)[/FONT]
[FONT=arial]00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)[/FONT]
[FONT=arial]0a:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)[/FONT]
[FONT=arial]0b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
Some lines from a lshw command
[/FONT][COLOR=#000000][FONT=Courier New]product: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz
[/FONT][/COLOR][COLOR=#000000][FONT=Courier New] *-network[/FONT][/COLOR]
[COLOR=#000000][FONT=Courier New] description: Ethernet interface[/FONT][/COLOR]
[COLOR=#000000][FONT=Courier New] product: 82579V Gigabit Network Connection
[/FONT][/COLOR][COLOR=#000000][FONT=Courier New] *-multimedia[/FONT][/COLOR]
[COLOR=#000000][FONT=Courier New] description: Audio device[/FONT][/COLOR]
[COLOR=#000000][FONT=Courier New] product: 7 Series/C210 Series Chipset Family High Definition Audio Controller[/FONT][/COLOR]
I will comment my installation process, if can be useful for anyone whit this laptop.
Thanks to RehabMAn !!!
- I create a USB with OSX 10.9.1 with Unibeast and laptop support. On a Virtual machine of Mavericks.
- Enter on BIOS (F2), and disable secure boot (you need to put a master password on the BIOS), disable virtualization, and Wake on LAN. Put the boot order correct, usually USB-HDD on top.
- With the Help of: http://www.tonymacx86.com/hp-probook-mavericks/112380-guide-installing-mavericks-hp-probook.html
I get the flags for boot with a Intel 4000HD
The flags are = IGPEnable=Yes IGPlatformID=01660003
- Boot, with the flags (in a USB2 port, not USB3) Follow the installer and format the disk as you want with a GUID partition map. But almost need one formatted as "Mac OS Extended (Journaled)".
- Follow the installer, and when finish. Reboot with the usb, but select the new disk. And use the flags. Finish the installation, and you get the desktop.
Using this tuto: http://www.tonymacx86.com/mavericks-laptop-support/111243-power-management-sandy-bridge-ivy-bridge-laptops.html
- Run Multibeast last version. Mine is 6.2.1. And select this options.
- DSDT-Free Installation
- Drivers & Bootloaders -> Drivers -> System -> Patched AppleIntelCPUPowerManagement
(be sure to select the version appropriate for the version of OS X you have installed) In this case OSX 10.9.0 - Customization -> System Definitions -> MacBookPro8,1
- Drivers -> Misc -> PS2/Keyboard/Mice.......
- Drivers -> Misc -> USB 3.0 Universal
- For the Probook Installer 6.1.13r3.pkg, i install SSDT Generator, and the Tool "Chameleon Wizzard".
- At this moment the system should can install, but (for me) i need to correct the boot. Like this tutorial http://www.tonymacx86.com/25-boot0-error-official-guide.html .
- When Follow the tuto, the system works. And i change the /extra/smbios.plist to change the model to "MacBookPro9,2". And put the boot flags in /extra/org.chameleon.Boot.plist
- I Installed an RT2870 USB to have wifi.
At this moment a lot of this works. I will keep updating this post