Contribute
Register

[HELP]When launching the installer, it is stuck in "gIOScreenLockState 3 ..."

Status
Not open for further replies.
@RehabMa Thank you very much for your continued response

RehabMan said:
Are you using a USB2 stick? (as per guide).
Did you try all USB ports?

EmuVariableUefi-64.efi not needed with AptioMemoryFix.efi.
Click to expand...
Now I had removed the EmuVariableUefi-64.efi.

I using a USB3 stick, but try USB2 stick before.
I had two USB3 ports, both of them had beed try....
 
pterC said:
@RehabMa Thank you very much for your continued response


Now I had removed the EmuVariableUefi-64.efi.

I using a USB3 stick, but try USB2 stick before.
I had two USB3 ports, both of them had beed try....
Click to expand...

Use a USB2 stick as is clearly stated in the guide.
 
RehabMan said:
Use a USB2 stick as is clearly stated in the guide.
Click to expand...
@RehabMan
According to your request, I switched to USB2 stick. When I started it for the first time, it could be started successfully:idea:, but after the restart, the problem appeared again，and never succeeded ever since。:|
The EFI file is the same as the one used last time.
In addition, I can boot the 10.12.6 installer and install it successfully. The difference is that nvme-patch is added.
 
pterC said:
@RehabMan
According to your request, I switched to USB2 stick. When I started it for the first time, it could be started successfully:idea:, but after the restart, the problem appeared again，and never succeeded ever since。:|
The EFI file is the same as the one used last time.
In addition, I can boot the 10.12.6 installer and install it successfully. The difference is that nvme-patch is added.
Click to expand...

You must provide details on your issue.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • EFI.zip
    2.2 MB · Views: 64
  • 1.jpg
    1.jpg
    294.2 KB · Views: 58
pterC said:
Sorry for my laziness， Attach my relevant files.
Click to expand...

You will need to be clear about what stage of the installation process you're currently stuck.
I cannot begin to guess.
 
RehabMan said:
You will need to be clear about what stage of the installation process you're currently stuck.
I cannot begin to guess.
Click to expand...
I can't enter the usb installer interface after first boot form clover.
Stuck at "gIOScreenLockState 3 ..."

If I don't select "debug=0x100", it will reboot immediately after "gIOScreenLockState" show up.
 

Attachments

  • EFI.zip
    2.2 MB · Views: 60
  • 20180730153958.jpg
    20180730153958.jpg
    283 KB · Views: 38
Last edited:
pterC said:
@RehabMan, Thank you again for your reply.

I had always try the invalid ig-platform-id "0x12345678", I set it in config.list. But it still reboot after "gIOScreenLockState" show up.:(
Click to expand...

It will always show that message.
Be patient... booting the installer from USB is not quick.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top