- Your Samsung SSD is not UEFI ,
- You have either not installed CLOVER
- or installed it in Legacy mode NOT UEFI
- The only bootable device in that list is your UEFI Flash disk
- Since even with USB installer the SSD panics , you cannot reach Desktop to edit its CLOVER
- Your best option is to boot using your UEFI Flash disk >Reformat the SSD in HFS+J format.
- This time it may work in the Disk Utility and may not need Terminal command.
- Then reinstall HS
Next time use all the steps we had gone through to check if you encounter any problems like this.
Remember during Mac HS install there may be 3-4 reboots
- Firs reboot in 2 minuets
- You should press F-12 and select your UEFI Flash on every reboot until you run Multibeast 10.1 on the new SSD with HS and then boot to desktop using your Login Name/Password. After that stage you can Eject your USB installer to kllet HS SSD to boot on its own.
- Once you select USB to get into Clover Boot Manager Screen , you switch to SSD to continue second and 3rd reboot
- Then you will see 3 icons. your USB installer+New SSD with HS+ HS Recovery Disk: now you are in a safe zone.
- Hope things are clear to you as to what to expect.
For some images of how things should look check
#34