- Joined
- May 14, 2014
- Messages
- 71
- Motherboard
- HP Probook 640 G1
- CPU
- i5-4300M
- Graphics
- HD 4600
- Mac
- Mobile Phone
Hi,
I successfully installed os x 10.9.3 a few weeks ago. Everything was smooth. But started this week, there's weird issue on the front case fan.(The one behind the vent, not CPU fan)
After boots up, everything looks normal. But only after I login to the os x, the front fan just goes nuts to a very high RPM. quite annoying. The cpu temperature is fine. It's less than 40 degree. GPU is around 45.
I'm using unibeast to boot. Installed nvidia web driver. Everything else is from multibeast.
syslog does not show any abnormal error.
HW specs are:
Xeon 1240v3, nvidia quadro k600, 16G RAM. Lenovo ThinkStation E32 chassis.
So if anyone could give me a direction, that what part may cause this issue?
Thanks
I successfully installed os x 10.9.3 a few weeks ago. Everything was smooth. But started this week, there's weird issue on the front case fan.(The one behind the vent, not CPU fan)
After boots up, everything looks normal. But only after I login to the os x, the front fan just goes nuts to a very high RPM. quite annoying. The cpu temperature is fine. It's less than 40 degree. GPU is around 45.
I'm using unibeast to boot. Installed nvidia web driver. Everything else is from multibeast.
syslog does not show any abnormal error.
HW specs are:
Xeon 1240v3, nvidia quadro k600, 16G RAM. Lenovo ThinkStation E32 chassis.
So if anyone could give me a direction, that what part may cause this issue?
Thanks