Contribute
Register

HELP NEEDED: HP Probook 430 G2 Broadwell

Status
Not open for further replies.
fatmaddin2000 said:
Here we go. It's dropping to 9 -

Code: 
Aug 17 16:13:32 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 18 21 ] iGPU P-States [ (8) 11 ]
Aug 17 16:13:35 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 14 18 21 ] iGPU P-States [ (8) 11 ]
Aug 17 16:13:36 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 14 18 19 21 ] iGPU P-States [ (8) 11 ]
Aug 17 16:13:42 Air kernel[0]: AICPUPMI: CPU P-States [ (12) 13 14 17 18 19 21 ] iGPU P-States [ 8 (10) 11 ]
Aug 17 16:13:48 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 14 16 17 18 19 21 ] iGPU P-States [ (8) 10 11 ]
Aug 17 16:13:49 Air kernel[0]: AICPUPMI: CPU P-States [ (12) 13 14 15 16 17 18 19 21 ] iGPU P-States [ 8 (9) 10 11 ]
Aug 17 16:13:50 Air kernel[0]: AICPUPMI: CPU P-States [ 12 13 14 15 16 17 18 19 (20) 21 ] iGPU P-States [ 8 9 10 11 (18) ]
Aug 17 16:13:59 Air kernel[0]: AICPUPMI: CPU P-States [ 11 12 (13) 14 15 16 17 18 19 20 21 ] iGPU P-States [ (8) 9 10 11 18 ]
Aug 17 16:16:10 Air kernel[0]: AICPUPMI: CPU P-States [ (9) 11 12 13 14 15 16 17 18 19 20 21 ] iGPU P-States [ (8) 9 10 11 18 ]
Aug 17 16:22:52 Air kernel[0]: AICPUPMI: CPU P-States [ 9 10 11 (12) 13 14 15 16 17 18 19 20 21 ] iGPU P-States [ (8) 9 10 11 18 ]
Aug 17 16:33:08 Air kernel[0]: AICPUPMI: CPU P-States [ 9 10 11 12 (13) 14 15 16 17 18 19 20 21 ] iGPU P-States [ 8 9 10 11 (13) 18 ]
Click to expand...

See if you can get it to drop to x5. If this is a fresh install, the system may be busy indexing for spotlight/etc.

Any idea, what I can do. HPI is using ssdtPRGen.sh tool to get the SSDT - right?
Click to expand...

In theory it is generating the same SSDT. Not sure about SMBIOS. You didn't provide ioreg yet.
 
The latest PBI CE uses 15.8 beta and smbios MacbookAir 7,2
 
nguyenmac said:
The latest PBI CE uses 15.8 beta and smbios MacbookAir 7,2
Click to expand...

There are two MacBookAir7,2 SMBIOS...

i5 MacBookAir7,2 or i7 MacBookAir7,2?

Not sure it is critical, but generally good idea to use the 'i5' variant for i5/i3 CPU laptops, and i7 for i7 CPU laptops...

I'll wait to see updated ioreg.
 
fatmaddin2000 said:
Here we go.

And yes it could be that the system is indexing. I did a fresh install this morning.
Click to expand...

From ioreg, it looks OK.

I tend to run without the FakeSMC plugins lately... they don't do anything very useful and use CPU cycles unnecessarily. You might try it and see if the system idles at a low pstate.
 
RehabMan said:
From ioreg, it looks OK.

I tend to run without the FakeSMC plugins lately... they don't do anything very useful and use CPU cycles unnecessarily. You might try it and see if the system idles at a low pstate.
Click to expand...

Removing FakeSMC Kext doesn't really make a change. It's dropping to 8/9. But I think there is some indexing going on. So maybe I need to wait and check again later.

Why do I need/not need FakeSMC?
 
Namsk86 said:
Hi,
This is not important and if you are not busy, please help me with running Mac on this laptop.

My problem is that i cant start install the system because i have a black screen after installer load, or restarting(i read forums that it is the problem with the graphic card HD 4400). Can you please help me make bootable flash drive. Thx a lot.

P.S. Sorry for my bad english :)
Click to expand...

If you have the exact same laptop like this with broadwell cpu you need to adjust Video Memory Size to 64MB. All other setting will cause graphical problems and black screens.
 
fatmaddin2000 said:
Removing FakeSMC Kext doesn't really make a change. It's dropping to 8/9. But I think there is some indexing going on. So maybe I need to wait and check again later.

Why do I need/not need FakeSMC?
Click to expand...

You cannot remove FakeSMC. I mentioned the FakeSMC plugins, not FakeSMC itself.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top