- Joined
- Aug 3, 2017
- Messages
- 17
- Motherboard
- ASUS Prime H270M microATX
- CPU
- i5-7600
- Graphics
- Intel HD 630
- Mac
- Classic Mac
- Mobile Phone
Hello all, I'm having serious issues trying to get upgraded to High Sierra from my working Sierra install. I've tried three methods, direct update, version posted along with the original public beta install, and then a clean install using Clover. All installs seem to come to the same conclusion. I finally get to the Clover screen and select boot from Mac OS, it appears to boot properly then stalls at about 90 percent through the boot screen progress. It then reboots back to the main Clover boot screen.
If I try another installation, I can see the SSD is reformatted into APFS, and there is content on the disk per Disk Utility.
At this point I'd go back to a working Sierra install, but would like to get HS working so I can use the NVME drives on the motherboard.
I should add that my original Sierra install using Unibeast was 4173, but tried using the latest Clover version for the HS install. At the Clover boot screen after all my install attempts, it is still at version 4173...
Thanks in advance for any help!
If I try another installation, I can see the SSD is reformatted into APFS, and there is content on the disk per Disk Utility.
At this point I'd go back to a working Sierra install, but would like to get HS working so I can use the NVME drives on the motherboard.
I should add that my original Sierra install using Unibeast was 4173, but tried using the latest Clover version for the HS install. At the Clover boot screen after all my install attempts, it is still at version 4173...
Thanks in advance for any help!