[Help] - Kernel Panic trying to boot El Capitan

[RehabMan]

I have tried unibeast with legacy boot mode but still same problem

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

 

[1824GM]

Hello, does anyone know if El Capitan will work with Chimera?

 

[VioletDragon]

No. Chimera doesn't work with El Capitan. [Guide] Booting the OS X installer on LAPTOPS with Clover.

 

[indaqub]

http://www.tonymacx86.com/el-capita...de-booting-os-x-installer-laptops-clover.html

Im not able to reach the installer...
I used your guide and used legacy mode. But when i select the usb Stick the apple logo shows up and after 1 Minute or so it shows me this pic below.

My Clover Folder is also attached to this post.

 

[RehabMan]

Im not able to reach the installer...
I used your guide and used legacy mode. But when i select the usb Stick the apple logo shows up and after 1 Minute or so it shows me this pic below.

My Clover Folder is also attached to this post.

The kexts you have in Clover/kexts/Other are not those linked from my guide.

You used HD3000 on 7-series config.plist. Does your laptop really have a 7-series chipset?

Please fill out your profile as requested in the guide.

Make sure you use a USB2 port, not USB3 (your USB3 controller, if you have it, is not likely to be supported)

 

[indaqub]

The kexts you have in Clover/kexts/Other are not those linked from my guide.

You used HD3000 on 7-series config.plist. Does your laptop really have a 7-series chipset?

Please fill out your profile as requested in the guide.

Make sure you use a USB2 port, not USB3 (your USB3 controller, if you have it, is not likely to be supported)

Thanks for your answer!

I chose now the config without 7 Series and removed the GenericUSBXHCI kext.
But i got still the same kernel panic screen as before.

Im also using only the USB 2.0 port.

where else could the problem be?

Current clover folder is attached

 

[RehabMan]

Thanks for your answer!

I chose now the config without 7 Series and removed the GenericUSBXHCI kext.
But i got still the same kernel panic screen as before.

There is no KP shown in post #44. It is "still waiting for root device". In the case of booting the installer from USB, it indicates a USB problem.

On what hardware did you create your USB installer?
Did you try all USB ports?

See guide for further ideas: http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html

Current clover folder is attached

The kexts are still not those linked from my guide.
If you are booting UEFI, you're missing OsxAptioFixDrv-64.efi.

 

[indaqub]

There is no KP shown in post #44. It is "still waiting for root device". In the case of booting the installer from USB, it indicates a USB problem.

On what hardware did you create your USB installer?
Did you try all USB ports?

See guide for further ideas: http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html



The kexts are still not those linked from my guide.
If you are booting UEFI, you're missing OsxAptioFixDrv-64.efi.

Thank for that hint!

I created the installer on a el capitan hackintosh
I tried all usb ports but still no change...

The kexts are still not those linked from my guide.

what do mean with that? I've copied the kexts from the links in the guide

im not booting in uefi mode. I disabled uefi booting, enabled legacy usb support in bios and prepared my usb with legacy mode...

should i try it with a usb 2.0? At the moment im using a 3.0 usb stick.

thank you so far!

 

[RehabMan]

what do mean with that? I've copied the kexts from the links in the guide

You did not (I checked the version of each).

They are not the current versions as linked from each README (to bitbucket).

im not booting in uefi mode. I disabled uefi booting, enabled legacy usb support in bios and prepared my usb with legacy mode...

should i try it with a usb 2.0? At the moment im using a 3.0 usb stick.

As I mentioned before, USB3 is a bad idea. Your USB3 controller is not likely to be supported.

 

[indaqub]

You did not (I checked the version of each).

They are not the current versions as linked from each README (to bitbucket).



As I mentioned before, USB3 is a bad idea. Your USB3 controller is not likely to be supported.

This is the link where i downloaded the latest version of fakesmc and included it to my clover folder
https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads

The same for VoodoPS2Controller...
https://bitbucket.org/RehabMan/os-x-voodoo-ps2-controller/downloads

I can't see no newer version than 1230 for fakesmc and 1229 for voodoops2controller.
Sorry if im completely on the wrong way...

Using usb 2 stick and the same clover folder leads to the same problem as before. :-/

thank you for you help rehabman!