HELP！Hasee Z7-i78172S2 how to inject HD4600?

[sevence]

Hello everyone!
Now I install mojave, I have a problem with the graphics card, I need everyone's help!
My notebook configuration:
CPU: i7-4720HQ
Mob:hasee Z7-i78172S2+hm87
GPU: HD4600+GTX970m
Three days ago, I followed the tutorial to install mojave using unibeast. After entering the system, the model is displayed as imac14. I changed it to macbookair6, 2 through SMBIOS. After rebooting, I entered the system normally.
Then use configuration.app to open config.plist, try to change Device/Fake ID/Intel GFX to 0x04128086 or 0x04168086 or blank, then inject 0x0a220006 or 0x0a2e0008 in Graphics/ig-platform-id, but after booting, black screen, about seven or eight seconds After that, the upper part of the screen flashes from time to time.
I also tried to inject with hackintool, select haswell and 0x0a220006, patch/general select all.Connectors, VRAM, Auto Detect Changes; patch/Advanced select DVMT, Dissable egpu, VRAM 2048M, Device id=hd4600, the result is still as above.
Last night, the notebook I was working on almost didn't turn on. There is really no way, ask for help!

 

[RehabMan]

Hello everyone!
Now I install mojave, I have a problem with the graphics card, I need everyone's help!
My notebook configuration:
CPU: i7-4720HQ
Mob:hasee Z7-i78172S2+hm87
GPU: HD4600+GTX970m
Three days ago, I followed the tutorial to install mojave using unibeast. After entering the system, the model is displayed as imac14. I changed it to macbookair6, 2 through SMBIOS. After rebooting, I entered the system normally.
Then use configuration.app to open config.plist, try to change Device/Fake ID/Intel GFX to 0x04128086 or 0x04168086 or blank, then inject 0x0a220006 or 0x0a2e0008 in Graphics/ig-platform-id, but after booting, black screen, about seven or eight seconds After that, the upper part of the screen flashes from time to time.
I also tried to inject with hackintool, select haswell and 0x0a220006, patch/general select all.Connectors, VRAM, Auto Detect Changes; patch/Advanced select DVMT, Dissable egpu, VRAM 2048M, Device id=hd4600, the result is still as above.
Last night, the notebook I was working on almost didn't turn on. There is really no way, ask for help!

See guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

 

[sevence]

See guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

thank you,RehabMan!I am working at the company now, go back and try to report the results to you at night.

 

[sevence]

See guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

Thank you,RehabMan!But when I use config_HD4600_4400_4200.plist,the screen flicher and flash……now,i paste the video to you.What can i do next to fix it?

 

[RehabMan]

Thank you,RehabMan!But when I use config_HD4600_4400_4200.plist,the screen flicher and flash……now,i paste the video to you.What can i do next to fix it?

Which screen are you referring to?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[sevence]

Which screen are you referring to?

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Thankyou!RehabMan,i have pasted debug report and EFI,help me check it,please!just now,i install mojave with unibeast again,because the screen flicking ,can`t do anything……

 

[RehabMan]

Thankyou!RehabMan,i have pasted debug report and EFI,help me check it,please!just now,i install mojave with unibeast again,because the screen flicking ,can`t do anything……

Your config.plist is wrong.

Refer to the guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

 

[sevence]

Your config.plist is wrong.

Refer to the guide:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

This config is used,but the screen flicker.RehabMan,i am a green hand to hackintosh,i don`t know how to fix it,whick value need to change.So i need you help,help,please!

 

[RehabMan]

This config is used,but the screen flicker.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[sevence]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

Thankyou,RehabMan.Now,i paste my computer`s gen_debug,cpu-z,config.plist.Please help me check it,and find which value need change to fix it.Using this config.plist(config_HD4600_4400_4200.plist),the screen almost flashed me to blind……thankyou!