- Joined
- Nov 13, 2011
- Messages
- 141
- Motherboard
- Gigabyte Vision D
- CPU
- i9 10850K
- Graphics
- Nvidia GT 710
All,
ISSUE: USB on front panel is flaky when using USB drive in both front G5 panel and rear mobo panel.
using a USB drive.....USB on front panel will operate fine as long as there is no USB drive connected to the rear I/O panel of the mobo. ie: if I plug in a usb drive into the rear mobo and then a USB drive into the G5 front panel ...the one in the G5 panel never shows............if I plug in a USB drive to the G5 front panel (it shows on the desktop and can browse and copy to and from) and then one in the rear mobo - the USB drive in the G5 front panel ejects and I get the notice that it was ejected improperly etc..... or sometimes the rear mobo usb will not even show on the desktop until I unplug the one in the front panel.
I built the break out cable for the front header of the G5 (doing 2 at same time) (did this a year ago for my first G5 customac - works perfect) and have checked with a voltmeter correct pinouts of the DIY cable - even replaced all wires and pins for the USB (in the DIY cable) -still same issue
Tested with 2 different G5 front panels
Swapped the cables into my older G5 customac - they worked fine (mobo - GA-Z68MA-D2H-B3)
connected USB header cable from old case to mobo - worked fine
mobo in this build is: G41MT-S2PT
please help - this has brought my 2 customacs for my boys to a stand still
thanks
ISSUE: USB on front panel is flaky when using USB drive in both front G5 panel and rear mobo panel.
using a USB drive.....USB on front panel will operate fine as long as there is no USB drive connected to the rear I/O panel of the mobo. ie: if I plug in a usb drive into the rear mobo and then a USB drive into the G5 front panel ...the one in the G5 panel never shows............if I plug in a USB drive to the G5 front panel (it shows on the desktop and can browse and copy to and from) and then one in the rear mobo - the USB drive in the G5 front panel ejects and I get the notice that it was ejected improperly etc..... or sometimes the rear mobo usb will not even show on the desktop until I unplug the one in the front panel.
I built the break out cable for the front header of the G5 (doing 2 at same time) (did this a year ago for my first G5 customac - works perfect) and have checked with a voltmeter correct pinouts of the DIY cable - even replaced all wires and pins for the USB (in the DIY cable) -still same issue
Tested with 2 different G5 front panels
Swapped the cables into my older G5 customac - they worked fine (mobo - GA-Z68MA-D2H-B3)
connected USB header cable from old case to mobo - worked fine
mobo in this build is: G41MT-S2PT
please help - this has brought my 2 customacs for my boys to a stand still
thanks