- Joined
- Apr 7, 2017
- Messages
- 19
- Motherboard
- Asus X99-PRO/USB 3.1
- CPU
- Intel Core I7 5820K
- Graphics
- EVGA Geforce 1080ti
- Mac
- Mobile Phone
Hi there,
I've been trying to get a stable USB boot system up and running, to no avail. I'm close - but not quite there.
System is;
Asus X99 Pro / USB 3.1 (latest firmware)
5820k
Corsair H110i GT (Connected to USB)
32GB Ripjaws
MSI GTX 970
Samsung NVME m.2 (Has windows on it, don't need driver support)
Seagate SSD (Fresh drive, intended MacOs install location)
The only peripherals connected are the corsair water pump, my keyboard and a mouse.
BIOS is setup mostly as default, however I have a small overclock running and I've disabled the serial port.
I have the USB installer to the point where it sporadically boots into the MacOs installer. Enough that I even managed to get a fresh install onto the partition. However, it boots maybe once out of 30 tries.
Probably my issues is I have no idea what I'm doing Most of the configuration has come from me reading various posts about X99 installations - but I really need the eyes of someone who knows what it all means.
config.plist attached.
Drivers64EUFI has the following;
kexts are;
Usually the boot hits this point then force reboots the system.
I've been trying to get a stable USB boot system up and running, to no avail. I'm close - but not quite there.
System is;
Asus X99 Pro / USB 3.1 (latest firmware)
5820k
Corsair H110i GT (Connected to USB)
32GB Ripjaws
MSI GTX 970
Samsung NVME m.2 (Has windows on it, don't need driver support)
Seagate SSD (Fresh drive, intended MacOs install location)
The only peripherals connected are the corsair water pump, my keyboard and a mouse.
BIOS is setup mostly as default, however I have a small overclock running and I've disabled the serial port.
I have the USB installer to the point where it sporadically boots into the MacOs installer. Enough that I even managed to get a fresh install onto the partition. However, it boots maybe once out of 30 tries.
Probably my issues is I have no idea what I'm doing Most of the configuration has come from me reading various posts about X99 installations - but I really need the eyes of someone who knows what it all means.
config.plist attached.
Drivers64EUFI has the following;
Code:
AppleImageCodec-64.efi
AppleKeyAggregator-64.efi
AppleUITheme-64.efi
DataHubDxe-64.efi
FirmwareVolume-64.efi
FSInject-64.efi
OsxAptioFix2Drv-free2000.efi
OsxFatBinaryDrv-64.efi
SMCHelper-64.efi
VBoxHfs-64.efi
kexts are;
Code:
ACPISensors.kext
CPUSensors.kext
FakeSMC.kext
GPUSensors.kext
IntelMausiEthernet.kext
LPCSensors.kext
NullCPUPowerManagement.kext
USBInjectAll.kext
XHCI-x99-injector.kext
Usually the boot hits this point then force reboots the system.
Attachments
Last edited: