HD4000 ivy bridge issue - ML 10.8.3 - GA-B75M-D3H i7

[nicosalto]

Hi Everyone,

I noticed that a lot of people seems to have similar issue on the forum with this motherboard and the latest ML install. I rode many posts but didnt find any solution yet!

I am using this guide from moarfish as reference :
http://www.tonymacx86.com/golden-builds/58062-moarfishs-build-ga-b75m-d3h-i5-3570k.html

There is my config:
i7 3770 ivy bridge
GA-B75M-D3H [Bios F11]
32Gb ram
geforce gtx660

And this is where i am stuck at :
I tried several ways to intall ML and the only solution for me was to switch the primary graphic card to the motherboad (and ignore the gtx660) in the bios and then install with the -x option.
When i first reboot i use -x again and can access the ML config and then desktop.
I then run multibeast with moarfish settings.
Unfortunatly when i reboot the second time, i can't access the desktop again, and with the -x option the display is all screwed up.
Obviously the problem come from the HD4000 internal graphic card from the motherboard.
Do anyone know the trick to make it work with ML?

 

[defbref]

You need to use GraphicsEnabler=No with that GPU, moarfish doesn't because he hasn't got a GPU.

 

[nicosalto]

Thanks Defbref for your answer.
I tried GraphicsEnabler=No before and didnt got any result.

Actually, now i can boot up on ML with -x -v GraphicsEnabler=No PCIRootUID=0
Which is better than before.

The problem is when i remove the -x i got this error :


i am not sure what does that mean ...

 

[nicosalto]

allright
i found a solution for this issue as well.
just add :
dart=0
into "Kernel Flags" in org.Chameleon.Boot.plist

now my ML seems to be booting fine! Thanks