- Joined
- May 7, 2013
- Messages
- 12
- Motherboard
- osx
- CPU
- i7
- Graphics
- Gigabyte Geforce GTX 1080
Hi Everyone,
I noticed that a lot of people seems to have similar issue on the forum with this motherboard and the latest ML install. I rode many posts but didnt find any solution yet!
I am using this guide from moarfish as reference :
http://www.tonymacx86.com/golden-builds/58062-moarfishs-build-ga-b75m-d3h-i5-3570k.html
There is my config:
i7 3770 ivy bridge
GA-B75M-D3H [Bios F11]
32Gb ram
geforce gtx660
And this is where i am stuck at :
I tried several ways to intall ML and the only solution for me was to switch the primary graphic card to the motherboad (and ignore the gtx660) in the bios and then install with the -x option.
When i first reboot i use -x again and can access the ML config and then desktop.
I then run multibeast with moarfish settings.
Unfortunatly when i reboot the second time, i can't access the desktop again, and with the -x option the display is all screwed up.
Obviously the problem come from the HD4000 internal graphic card from the motherboard.
Do anyone know the trick to make it work with ML?
I noticed that a lot of people seems to have similar issue on the forum with this motherboard and the latest ML install. I rode many posts but didnt find any solution yet!
I am using this guide from moarfish as reference :
http://www.tonymacx86.com/golden-builds/58062-moarfishs-build-ga-b75m-d3h-i5-3570k.html
There is my config:
i7 3770 ivy bridge
GA-B75M-D3H [Bios F11]
32Gb ram
geforce gtx660
And this is where i am stuck at :
I tried several ways to intall ML and the only solution for me was to switch the primary graphic card to the motherboad (and ignore the gtx660) in the bios and then install with the -x option.
When i first reboot i use -x again and can access the ML config and then desktop.
I then run multibeast with moarfish settings.
Unfortunatly when i reboot the second time, i can't access the desktop again, and with the -x option the display is all screwed up.
Obviously the problem come from the HD4000 internal graphic card from the motherboard.
Do anyone know the trick to make it work with ML?