- Joined
- Jul 1, 2015
- Messages
- 11
- Motherboard
- Smg NP700Z5C-S01UB
- CPU
- Intel i7-3615QM HM76
- Graphics
- Intel HD4000 1600x900
- Mac
- Classic Mac
- Mobile Phone
Evidently not on your USB. If you want me to check what you have on your USB, provide the EFI/Clover folder from USB. If you're booting from USB, then you're getting all the configuration from EFI on the USB, none of it from HDD EFI.
It is either that or read below...
DSDT.aml is not loading because you have config.plist/ACPI/DSDT/Name="" (you have it set to blank string).
Clover only does what you tell it to do. If you tell it the name of your DSDT file is "", then that's what it looks for.
Thank you for all of your help RehabMan! This little tip is precisely all I needed to get DSDT loaded. Now I have brightness and both internal and external display working with full Qe/Ci acceleration.
For future reference this was achieved using the ID: 0x01660004
Cannot overstate my gratitude enough. Thank you for your time and patience.