- Joined
- Sep 30, 2011
- Messages
- 45
- Motherboard
- Z390 Designare
- CPU
- i7 9700K
- Graphics
- UHD 630
- Mac
- Classic Mac
- Mobile Phone
i have beautiful 1920x1080 on Intel HD 3000 Integrated Graphics under Snow Leopard 10.6.8, but how?? i thought that wasn't supposed to work until lion!
here's how i got there:
i had been having problems with my USB port on my customacmini (i3 2105 / h67n-b3-usb3 f7) on every usb port it would read an SD card in a simple card reader and Keyboard, but not a usb hard drive, even on external power.
posted about the usb here on oct 11 6:11am
viewtopic.php?f=168&t=33412&start=210
he suggested, after the other header pin failed the test too, that i RMA the motherboard. i did that. and i had the exact same problem with the new motherboard.
i resolved to wipe my drive and start fresh with a SL 10.6.0 > EasyBeast, update helper > 10.6.8 > UserBeast with ga-h67n-b3-usb3-f7.aml, ethernet, USBRollback
more or less. there have been kernel panics here and there that i just sort of fixed as i went along.
and now the usb hard drive still wouldn't work. i did a second run of multibeast on my new 10.6.8 clean system to add the usb roll-back ktext. when i booted up it all booted fine and then went straight to black. sort of like this thread
viewtopic.php?f=3&t=34152
i unplugged and re-plugged in the hdmi cable and i went to the power button to shut it down, but instead it woke up from a weird kind of sleep showing full resolution 1920x1080 instead of the 1024x768 it should show under snow leopard? i've now tried adding storage injector and rebooted 3 times with the exact same behavior.
how is this possible? i thought snow leopard couldn't run the HD3000 onboard graphics ?
i did a complete hard drive wipe of my lion installation. did the machine store some info from my previous Lion installation on the CMOS or something?
and my USB hard drives still don't work! they work fine on my other machines.
i've attached an iphone picture so you can see the craziness!
here's how i got there:
i had been having problems with my USB port on my customacmini (i3 2105 / h67n-b3-usb3 f7) on every usb port it would read an SD card in a simple card reader and Keyboard, but not a usb hard drive, even on external power.
posted about the usb here on oct 11 6:11am
viewtopic.php?f=168&t=33412&start=210
he suggested, after the other header pin failed the test too, that i RMA the motherboard. i did that. and i had the exact same problem with the new motherboard.
i resolved to wipe my drive and start fresh with a SL 10.6.0 > EasyBeast, update helper > 10.6.8 > UserBeast with ga-h67n-b3-usb3-f7.aml, ethernet, USBRollback
more or less. there have been kernel panics here and there that i just sort of fixed as i went along.
and now the usb hard drive still wouldn't work. i did a second run of multibeast on my new 10.6.8 clean system to add the usb roll-back ktext. when i booted up it all booted fine and then went straight to black. sort of like this thread
viewtopic.php?f=3&t=34152
i unplugged and re-plugged in the hdmi cable and i went to the power button to shut it down, but instead it woke up from a weird kind of sleep showing full resolution 1920x1080 instead of the 1024x768 it should show under snow leopard? i've now tried adding storage injector and rebooted 3 times with the exact same behavior.
how is this possible? i thought snow leopard couldn't run the HD3000 onboard graphics ?
i did a complete hard drive wipe of my lion installation. did the machine store some info from my previous Lion installation on the CMOS or something?
and my USB hard drives still don't work! they work fine on my other machines.
i've attached an iphone picture so you can see the craziness!