Since upgrading to 10.10.3, Ive lost Turbo in speedstep. CPU limited to 1600Mhz.
I know this has been a problem on other i5 3317U devices, any updates on fixing this?
Tried to switch SMBIOS to MBP9,2.
Using clover 31xx
700T1CA01
Wow. Hours spent getting SSDT properly injected...still has not been properly accepted but at least turbo states are being used BUT only up to x24. No matter what Ivybridge fix I use in ssdtPRgen.sh . P-States being used are 8,12,14,17,21,24.
Despite this & knowing the 3317u clock is at 2.6 turbo, I OC'd the processor using Clover Configurator. CPU tab, Bus Speed khz. Currently using 112,500x24 = 2.7. Pretty Sweet Temps at rest hover at 42 degrees C & 70 deg C at x24 for a few minutes. Still 17W.
It is normal. According to Intel spec, top turbo states are only available with a single core active. Most of the time, both cores are active when running OS X.
Clover cannot overclock your CPU. The only thing you're doing is injecting incorrect information.
...
interesting you say this. i thought I had read otherwise. http://clover-wiki.zetam.org/Configuration/CPU
If no OC, why do "Clock Issues may Arise" . Also, the Clocks are slightly under clocked for initial install.
i attached a screen capture of HWmonitor and Intel Power Gadget. Interestingly, they differ in number. I would trust the Intel; however, the Geekbench scores change when I change the bus clocks in Clover Config!?