[Guide] Native Power Management for Laptops

[cdqrain]

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[RehabMan]

...

Try alternate DropTables as I mentioned previously.
- you can find the alternate in #DropTables in my guide config.plist files
- set also Generate=true, but make sure plug-in type is not double injected (may require edits either to one of the generated SSDTs)

 

[davidmvilla02]

Help!!! Frequency cpu stable 1.70
My laptop
asus x202e
el capitan 10.11.6
cpu: intel i3 3217u
ram: 4gb ddr3
bootloader clover

 

[RehabMan]

Help!!! Frequency cpu stable 1.70
My laptop
asus x202e
el capitan 10.11.6
cpu: intel i3 3217u
ram: 4gb ddr3
bootloader clover

Read post #1, "Problem Reporting".

Your profile is wrong. i3-3217u is HD4000. Your profile says HD3000. Please fix.

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[davidmvilla02]

Sorry i speak spanish, bad english.
Asus x202e
Cpu intel core i3 3217u Clover UEFFI
Graphics: HD4000 1366x768
Audio: Realtek 269
Wifi: Atheros AR5b93

cpu is always 1,70 in intel cpu gadget, bateri drain fast

 

[RehabMan]

cpu is always 1,70 in intel cpu gadget, bateri drain fast

Read post #1, "Problem Reporting".

 

[ragilt1]

help me please,

i got an error when generate SSDT on my hackintosh (using MBP 12,1 smbios)
ssdtPRGen always give an warning that the model and board- id are mismatch. i don't know where the problem but when i configure smbios to MBA 7,2, ssdtPRGen works prefectly without warning message. So how to fix this warning?

now im using SSDT from Clover (F4) and my prosesor speed step not stucked, it works on x10, x13, x20

Dell 5458
i3 5005U Broadwell
IHD 5500

thanks,

 

[RehabMan]

help me please,

i got an error when generate SSDT on my hackintosh (using MBP 12,1 smbios)
ssdtPRGen always give an warning that the model and board- id are mismatch. i don't know where the problem but when i configure smbios to MBA 7,2, ssdtPRGen works prefectly without warning message. So how to fix this warning?

now im using SSDT from Clover (F4) and my prosesor speed step not stucked, it works on x10, x13, x20

Dell 5458
i3 5005U Broadwell
IHD 5500

thanks,

The warning is telling you that your board-id is does not correspond to the Mac model you're using.

 

[ragilt1]

The warning is telling you that your board-id is does not correspond to the Mac model you're using.

I found the problem,
script from ssdtPRGen detec system model as "MacBookPro12," not as MacBookPro12,1 so im trying input manual model and works !

but from where ssdtPRgen check models of system? i checked my SMBios are correct

 

[RehabMan]

View attachment 210290

I found the problem,
script from ssdtPRGen detec system model as "MacBookPro12," not as MacBookPro12,1 so im trying input manual model and works !

but from where ssdtPRgen check models of system? i checked my SMBios are correct

Longstanding bug with certain Dell (maybe others) computers (truncating the SMBIOS model). Use a shorter SMBIOS.