- Joined
- Sep 12, 2014
- Messages
- 6
- Mac
- Classic Mac
- Mobile Phone
Ok i have the Asus ASUS M32CD Desktop (link bellow) DDR3 version.
Please note
Bios Settings
You should now have a fully functioning hackintosh install updating and everything working great. If you have any questions feel free to post here. It took me a while to get it going smoothly.
Please note
- I have upgraded the power supply to a EVGA 650 watt
- I'M not using the Intel integrated 530 graphics in the Core i5; I have a GTX 650 currently, and will soon have a 970
- the M32CD is a pre built system from ASUS
- has a core i5 6400
- 8gb DDR3
- 1 TB hard drive
- Amazon link https://www.amazon.com/dp/B014QVM2KO/?tag=tonymacx86com-20
Bios Settings
- enable AHCI Handoff
- disable Virtualization
- leave everything else default
- On a real mac or other hackintosh download macOS Seirra from the app store
- run through the UniBeast guide and use UEFI boot mode
- download MultiBeast for Sierra
- Download Nvidia web drivers
- I've found out the best place to get the web drivers is from the MacVideoCards website found here http://www.macvidcards.com/drivers.html
- copy them both to your USB
- You can also download these after installation, so just put them here to make it easier.
- press delete or f2 to get into the UEFI
- Set it to boot from your USB in EFI mode
- restart the installation should load without any issues. If you are using an older Nvidia card like i was, it will work fine. But, if you have a newer card like my future 970 that's on the way, you will need to do nvda_disable=1
- install as you would normally on a Mac
- once installed reboot onto the USB stick and re run the nvda command if needed
- set up your user account as normal
- networking should work but the wifi card is not supported
- run MultiBeast
- click Quick Start
- clover EFI
- networking you want to select RealTek 2.0
- also under USB you need the extra ports and 3.0 support checked
- let it run and then reboot
- Install the web drivers
- and reboot again
- then the last step is to download the VoodoHDA audio 2,8.9 and install it. you will also need KextBeast to do this
You should now have a fully functioning hackintosh install updating and everything working great. If you have any questions feel free to post here. It took me a while to get it going smoothly.