Contribute
Register

[Guide] Lenovo Yoga 3 14 [Broadwell, HD5500]

Status
Not open for further replies.
luisabrie said:
Code: 
LY314:~ LY314$ kextstat|grep -y acpiplat
   13    2 0xffffff7f82cc8000 0x66000    0x66000    com.apple.driver.AppleACPIPlatform (4.0) A29C7512-D3A8-3AED-9721-3A5FF1A32EB2 <12 11 7 6 5 4 3 1>
LY314:~ LY314$ kextstat|grep -y appleintelcpu
LY314:~ LY314$ kextstat|grep -y applelpc
   94    0 0xffffff7f826a6000 0x3000     0x3000     com.apple.driver.AppleLPC (3.1) 32BDCF9F-0473-32D4-9DAE-F523EFB2D244 <84 12 5 4 3>
LY314:~ LY314$ kextstat|grep -y applehda
   98    1 0xffffff7f829d2000 0x1c000    0x1c000    com.apple.driver.AppleHDAController (272.18.1) 2E00D0C5-50F2-30C6-9A22-A85242433B8A <97 96 68 12 7 6 5 4 3 1>
  115    0 0xffffff7f82b3c000 0xab000    0xab000    com.apple.driver.AppleHDA (272.18.1) 48CC0220-B853-37A0-865B-F531D757C66E <114 98 97 96 89 68 6 5 4 3 1>
LY314:~ LY314$

Code: 
LY314:~ LY314$ sudo touch /System/Library/Extensions && sudo kextcache -u /
Password:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext IOBluetoothFamily.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AirPortBrcm4360.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext HDAEnabler3.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Broadcom_WiFi.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM2.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmPatchRAM.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext BrcmFirmwareRepo.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ApplePS2SmartTouchPad.kext
kext-dev-mode allowing invalid signature -67030 0xFFFFFFFFFFFEFA2A for kext AppleHDAHardwareConfigDriver.kext
kext-dev-mode allowing invalid signature -67061 0xFFFFFFFFFFFEFA0B for kext AppleHDA.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
LY314:~ LY314$
Click to expand...

BCM94352 requires no SMBIOS whitelist patch. Why is do you have two such patches present in your config.plist?

You're using the US 5ghz patch. Are you located in North America?

Did you disable "Wake for network access" in SysPrefs->Energy Saver?

What are the exact differences between speed on Windows vs. OS X? How are you testing WiFi speed?

--

Most card readers are not supported... There are some guides for USB card readers, but not sure if they have been updated to 10.11. Lots of USB changes in 10.11.
 
Can you tell me which patches I need to remove from the config.plist?

No, I am not in North America, but I have a router that is set by default to the US and I cannot change the country.

I haven't disable "wake for network access" in my system preferences.

I have an 802.11 ac 1200 mbps router and 100 Mbps simetrical internet connection speed and I get 12,4 mb/s local transfer speed with a NAS while on the Mac I am just getting 8,75 mb/s. Also while doing an internet speed test on speedtest.net I am getting roughly 70 mbps on OS X while on windows I am getting 95 mbps.
 
luisabrie said:
Can you tell me which patches I need to remove from the config.plist?
Click to expand...

The ones for wifi whitelist.

No, I am not in North America, but I have a router that is set by default to the US and I cannot change the country.
Click to expand...

You might have difficulty connecting to other routers...

I haven't disable "wake for network access" in my system preferences.
Click to expand...

Necessary.

I have an 802.11 ac 1200 mbps router and 100 Mbps simetrical internet connection speed and I get 12,4 mb/s local transfer speed with a NAS while on the Mac I am just getting 8,75 mb/s. Also while doing an internet speed test on speedtest.net I am getting roughly 70 mbps on OS X while on windows I am getting 95 mbps.
Click to expand...

Don't expect exact performance between Windows and OS X.

Note also that your ioreg shows CPU PM is not implemented.
 
luisabrie said:
I follow the guide with precisión but I could not get power management to work, and also 5GHZ wifi, I might just give up. I'll make a fresh install of OS X again, any recomendations to not commit the same mistakes?
Click to expand...

Evidently not so precise if it isn't working. Did you read "Problem Reporting"?
 
RehabMan said:
Evidently not so precise if it isn't working. Did you read "Problem Reporting"?
Click to expand...

Code: 
Scope (_PR_) {222 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookAir6,2' with board-id [Mac-7DF21CB3ED6977E5]
Broadwell Core i5-5200U processor [0x306D4] setup [0x0606]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2200 MHz)
Number of Turbo States: 5 (2300-2700 MHz)
Number of P-States: 20 (800-2700 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0606 instead of 0x0906)

Error: board-id [Mac-7DF21CB3ED6977E5] not supported by Broadwell – check SMBIOS data / use the -c option

Do you want to continue (y/n)?
While running the script, this pop up, I just continue and put no and no. Then I just copy the ssdt to the acpi/patched directory but no luck. I haven't read about problem reporting
 
luisabrie said:
Code: 
Scope (_PR_) {222 bytes} with ACPI Processor declarations found in the DSDT (ACPI 1.0 compliant)
Generating ssdt.dsl for a 'MacBookAir6,2' with board-id [Mac-7DF21CB3ED6977E5]
Broadwell Core i5-5200U processor [0x306D4] setup [0x0606]
With a maximum TDP of 15 Watt, as specified by Intel
Number logical CPU's: 4 (Core Frequency: 2200 MHz)
Number of Turbo States: 5 (2300-2700 MHz)
Number of P-States: 20 (800-2700 MHz)
Adjusting C-States for detected (mobile) processor
Injected C-States for CPU0 (C1,C3,C6,C7)
Injected C-States for CPU1 (C1,C2,C3,C6,C7)
Warning: 'cpu-type' may be set improperly (0x0606 instead of 0x0906)

Error: board-id [Mac-7DF21CB3ED6977E5] not supported by Broadwell – check SMBIOS data / use the -c option

Do you want to continue (y/n)?
While running the script, this pop up, I just continue and put no and no. Then I just copy the ssdt to the acpi/patched directory but no luck. I haven't read about problem reporting
Click to expand...

You can continue... it is just warning you that your SMBIOS is not a Broadwell SMBIOS (something for you to look into eventually... and probably re-run this script).
 
Can you help me with this?
 

Attachments

  • IMG_5419.jpg
    IMG_5419.jpg
    521.5 KB · Views: 147
  • IMG_5420.jpg
    IMG_5420.jpg
    488.2 KB · Views: 201
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top