[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

[RehabMan]

This is all file

You entered the data into Devices/Arbitrary incorrectly.
Look at the image in post #317 and compare to your own data here. Carefully.

 

[Leafire]

You entered the data into Devices/Arbitrary incorrectly.
Look at the image in post #317 and compare to your own data here. Carefully.

Oh thanks you, I test and seems works perfectly, very thanks for your help

I have another question, I buy a Wifi Card Broadcom BMC94352z for native wifi+bluetooth support
I only need to install FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from first page with Terminal in Library/Extensions?

 

[RehabMan]

Oh thanks you, I test and seems works perfectly, very thanks for your help

Please attach full problem reporting files so I can verify before making the changes at github.

I have another question, I buy a Wifi Card Broadcom BMC94352z for native wifi+bluetooth support
I only need to install FakePCIID.kext and FakePCIID_Broadcom_WiFi.kext from first page with Terminal in Library/Extensions?

All requirements are met for BCM94352 if you follow the guide.

 

[Leafire]

Please attach full problem reporting files so I can verify before making the changes at github.



All requirements are met for BCM94352 if you follow the guide.

Ok this is full file

I not follow BCM94352 step because I follow Edimax steps and install kext of Edimax, now I buy BCM94352 and would install it,
what should I do?
thanks

 

[RehabMan]

Ok this is full file

I don't think HDMI audio will work for you.
But it should if you update to current config_UHD.plist now checked in to github.

I not follow BCM94352 step because I follow Edimax steps and install kext of Edimax, now I buy BCM94352 and would install it,
what should I do?
thanks

There is no separate "step" for BCM94252. All required files are installed by install_downloads.sh already.

 

[Leafire]

I don't think HDMI audio will work for you.
But it should if you update to current config_UHD.plist now checked in to github.

Can send me link? I will test and Sayd You

There is no separate "step" for BCM94252. All required files are installed by install_downloads.sh already.

Ah ok perfect
Thanks You

 

[RehabMan]

Can send me link? I will test and Sayd You

Already updated in github.
Read post #1 regarding github updates.

Also, it would be helpful if you would try CoreDisplayFixup.kext instead of the CoreDisplay patcher.
As that is something that may help eliminate mistakes for those following the guide.

 

[Leafire]

Already updated in github.
Read post #1 regarding github updates.

Also, it would be helpful if you would try CoreDisplayFixup.kext instead of the CoreDisplay patcher.
As that is something that may help eliminate mistakes for those following the guide.

Ok , If write me steps I will try and Let You know

 

[RehabMan]

Ok , If write me steps I will try and Let You know

The steps for updating to new github content are in post #1.

If you're asking about CoreDisplayFixup.kext:
- restore CoreDisplay framework to vanilla (run the macOS installer)
- install CoreDisplayFixup.kext to /Library/Extensions

 

[Leafire]

The steps for updating to new github content are in post #1.

If you're asking about CoreDisplayFixup.kext:
- restore CoreDisplay framework to vanilla (run the macOS installer)
- install CoreDisplayFixup.kext to /Library/Extensions

I try your config.plist new , works good but I see that cursor of trackpad is more slower than my config.plist, I don't know why
consider that I haven't kext of Alps because with Kext of Alps don't work FN+ Brightness UP/DOWN so I have your VoodooPsController

Can write me how fix HDMI audio? I will insert in my config.plist