[Guide] Lenovo T430 - Yosemite

[huyenduy2008]

Something else is wrong. The two are not related.

Make sure you regen SSDT when you change SMBIOS.

Thank you for your reply. SMBIOS set for MacBook Pro 9,2 and I have connected my DVD drive, DVD Player is now working and support full features.
With SMBIOS MacBook Air, it did not require DVD drive

 

[RehabMan]

Thank you for your reply. SMBIOS set for MacBook Pro 9,2 and I have connected my DVD drive, DVD Player is now working and support full features.
With SMBIOS MacBook Air, it did not require DVD drive

Not surprising given that MacBookAir5,2 has no built-in DVD, yet MacBookPro9,2 does.

 

[subastaso]

Excuse me but I am a rookie on Hackintosh. I recently installed Yosemite 10.10.5 on my T430 but I cannot make the audio, power management, brightness and sleep feature to work.

• Audio: tried everything but no device is detected.
• Power management: doesn´t know where to start, the battery symbol is crossed.
• Brightness: unable to use the function keys.
• Sleep: the screen blanks and I cannot wake it up, just power off.

Can anybody help me with a step by step for dummies?

Thanks

System: Lenovo T430 2349N7G
CPU: i5-3230m/QM77
Graphics: HD4000, 1366x768x32
BT: Broadcom 20702A3
Audio: Realtec ACL3202 aka. ALC269

 

[RehabMan]

Excuse me but I am a rookie on Hackintosh. I recently installed Yosemite 10.10.5 on my T430 but I cannot make the audio, power management, brightness and sleep feature to work.

• Audio: tried everything but no device is detected.
• Power management: doesn´t know where to start, the battery symbol is crossed.
• Brightness: unable to use the function keys.
• Sleep: the screen blanks and I cannot wake it up, just power off.

Can anybody help me with a step by step for dummies?

Thanks

System: Lenovo T430 2349N7G
CPU: i5-3230m/QM77
Graphics: HD4000, 1366x768x32
BT: Broadcom 20702A3
Audio: Realtec ACL3202 aka. ALC269

http://www.tonymacx86.com/yosemite-...faq-read-first-laptop-frequent-questions.html

 

[kartoffelsalat_reloaded]

Excuse me but I am a rookie on Hackintosh. I recently installed Yosemite 10.10.5 on my T430 but I cannot make the audio, power management, brightness and sleep feature to work.

• Audio: tried everything but no device is detected.
• Power management: doesn´t know where to start, the battery symbol is crossed.
• Brightness: unable to use the function keys.
• Sleep: the screen blanks and I cannot wake it up, just power off.

Can anybody help me with a step by step for dummies?

Thanks

System: Lenovo T430 2349N7G
CPU: i5-3230m/QM77
Graphics: HD4000, 1366x768x32
BT: Broadcom 20702A3Audio: Realtec ACL3202 aka. ALC269

For Audio, Power Management, Battery and Brightness you need DSDT and fixes for the T430, plus the corresponding kexts.

 

[subastaso]

hello! I have the same T430 configuration and followed your guide using your archives. Everything works fine except the audio. I have tried everything ...Can you help me?

Im using the AppleHDA kext from the thread.

 

[kartoffelsalat_reloaded]

Your ioreg is corrupt.

http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html

 

[subastaso]

Here it goes again. Thanks!View attachment yosemite_amc_ioreg.ioreg

 

[kartoffelsalat_reloaded]

Again corrupt ...


Did you boot with - kext-dev-mode=1

If yes:
Did you patched your DSDT with Layout ID? Be sure that you patch the correct ID - for me it is 28.

If yes:
Did you applied IRQ Fix?
-> both can obtained from RehabMans repo.

If yes:
Did the AppleHDA load?

[COLOR=#000000][FONT=Menlo]kextstat | grep -i HDA[/FONT][/COLOR]

If no:
Check console for AppleHDA.

 

[subastaso]

Thanks again for your reply.

AppleHDA was not loading, so I applied the IRQ fix and now it loads.
Im trying to patch the DSDT with layout id 28 but don´t know how, which will be the correct numbers on this one for the corresponding 28?

into method label _DSM parent_label HDEF remove_entry;
	into device label HDEF insert
	begin
	Method (_DSM, 4, NotSerialized)\n
	{\n
	If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
	Return (Package()\n
	{\n
	"layout-id", Buffer() { 3, 0x00, 0x00, 0x00 },\n
	"hda-gfx", Buffer() { "onboard-1" },\n
	"PinConfigurations", Buffer() { },\n
	//"MaximumBootBeepVolume", 77,\n
	})\n
	}\n
	end;