[Guide] Lenovo IdeaPad U330/U430/U530 using Clover UEFI (10.11)

[Mihiku]

I've updated via appstore.
impossible to find the clover 3625 ! any link somewhere?

So, I've put back my previous clover version 3354
put back the config.plist
copy the kext into the folders of clover
restart
and sound appeared ! ...was it just the clover version?

thanks for helping

 

[RehabMan]

I've updated via appstore.
impossible to find the clover 3625 ! any link somewhere?

It is on sourceforge.

 

[tishu]

Hello
Thanks for the guide it works pretty well. I cannot get the battery status icon to work though. It just shows an X as in battery is empty but that is not the case. Same icon when the computer is plugged. I have tried to install the tools including ACPIBatteryManager.kext from the git repo twice with no luck.
Any idea?

 

[RehabMan]

Hello
Thanks for the guide it works pretty well. I cannot get the battery status icon to work though. It just shows an X as in battery is empty but that is not the case. Same icon when the computer is plugged. I have tried to install the tools including ACPIBatteryManager.kext from the git repo twice with no luck.
Any idea?

Read post #1, "Problem Reporting".

 

[tishu]

Sorry was just gathering the files. Attached both, and here is the required output

Tishus-Airownloads tishu$ kextstat|grep -y acpiplat
13 2 0xffffff7f82246000 0x66000 0x66000 com.apple.driver.AppleACPIPlatform (4.0) A29C7512-D3A8-3AED-9721-3A5FF1A32EB2 <12 11 7 6 5 4 3 1>
Tishus-Airownloads tishu$ kextstat|grep -y appleintelcpu
Tishus-Airownloads tishu$ kextstat|grep -y applelpc
87 0 0xffffff7f81ed2000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) 32BDCF9F-0473-32D4-9DAE-F523EFB2D244 <83 12 5 4 3>
Tishus-Airownloads tishu$ kextstat|grep -y applehda
94 0 0xffffff7f821bf000 0x1e000 0x1e000 com.apple.driver.AppleHDAController (274.9) BAE4F922-DD74-3447-A5C1-BFC33B8C0A3E <93 92 67 12 7 6 5 4 3 1>
Tishus-Airownloads tishu$ ls -l /System/Library/Extensions/AppleHDA.kext/Contents/Resources/*.zml*
-rw-r--r-- 1 root wheel 4540 1 Sep 08:31 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/Platforms.zml.zlib
-rw-r--r-- 1 root wheel 1899 1 Sep 08:31 /System/Library/Extensions/AppleHDA.kext/Contents/Resources/layout3.zml.zlib
Tishus-Airownloads tishu$ sudo touch /System/Library/Extensions && sudo kextcache -u /
Password:
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBXHC_u430.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext
kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext NoSleep.kext

​

 

[RehabMan]

Sorry was just gathering the files. Attached both, and here is the required output

​

Please read post #1, "Problem Reporting". Carefully.

Hint: You forgot EFI/Clover.

Note: Your ioreg shows you're booting from USB:

0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,MBR,0x00000000,0x2,0x64000) @8D13E298

The USB is configured for installation. Features such as battery status will only work when you boot from EFI/Clover on HDD/SSD prepared as per the post-install instructions in post #1.

Read the guide carefully. Follow exactly.

 

[tishu]

Hint: You forgot EFI/Clover.

Note: Your ioreg shows you're booting from USB:

The USB is configured for installation. Features such as battery status will only work when you boot from EFI/Clover on HDD/SSD prepared as per the post-install instructions in post #1.

Read the guide carefully. Follow exactly.

Yes, I use USB because of this issue . I didn't post that one here because I didn't follow the guide exactly. Didn't know it was related to the battery indicator issue. At least I know why battery doesn't work.

Thanks

 

[RehabMan]

Yes, I use USB because of this issue . I didn't post that one here because I didn't follow the guide exactly. Didn't know it was related to the battery indicator issue. At least I know why battery doesn't work.

Thanks

Follow the guide as written. Even your dual-boot question is covered in the guide.

 

[thepublocal]

Does anyone know of a suitable U430p LCD 'upgrade' ? Was considering buying an XPS 13/15 but realised it is only the screen that was attracting me. Happy to upgrade the LCD on this model.

Any compatible upgrades much appreciated!

 

[tluck]

i was wondering about touchscreen (single click). On my Lenovo T460, touching the screen moves the mouse but i dont seem to have a way to make a click? any pointers (tips etc) on what was done or what should I do to make this part work?