[Guide] Lenovo Ideapad S340 Laptop on Catalina

[Patrick545]

Anyone knows how to fix the HDMI Audio non working when I connect to my tv, and the webcam? The webcam in particular shows nothing, but for example if I point the iPhone torch on the camera then the camera shows just red.

 

[Patrick545]

@curtistn
Yes of course. Replugged the antennas, tried to put those that came complete with the adapter. No network is visible. The seller on Ali persistently talks about the change of the channel

Do the BT works? Cause to me happened that the BT worked and the Wifi not.

 

[maksim7293]

Do the BT works? Cause to me happened that the BT worked and the Wifi not.

Do you have No WiFi everywhere? Is there an opportunity to check in win10? Bluetooth kind of works, but there are two of them, one on the module itself, and the second on the USB sash.

 

[4mit]

Anyone knows how to fix the HDMI Audio non working when I connect to my tv, and the webcam? The webcam in particular shows nothing, but for example if I point the iPhone torch on the camera then the camera shows just red.

Might sound silly, but is your camera shutter open ?
The little sliding switch near the camera.

 

[4mit]

Do you know if I can use a different wifi card, compatible with hackintosh, and with airdrop and so on working?

Check this post for some recommendations:

[Guide] Lenovo Thinkpad T440S using Clover UEFI hotpatch

Overview Welcome to my Lenovo Thinkpad T440S macOS Mojave guide. This guide uses the Clover UEFI hotpatching method as opposed to ACPI static patching method. This method is the universal solution to all models as no changes are required whether you have the: i3, i5 or i7 model or if you have...

www.tonymacx86.com

 

[Jiveman]

Good morning everyone. Purchased an adapter with the BCM94360CS2 adapter, but does not work WiFi. More precisely, the system is defined, but shows that there are no available networks. Could this be a problem with the adapter himself? In win10 it also doesn't show any network.

I too just got my BCM94360CS2 with adapter and like maksim7293 also have no wifi working. I tried installing several different kexts all without luck. I read somewhere about taping pin's 54&56 (11 in from the right on the back of the adapter) as these are used for disabling Wifi/ BT? Has anyone had any success with that?

 

[Jiveman]

Well this was a bit unexpected. I noticed 4mit had a newer firmware than I did. I was on 2.04, not 2.05. After upgrading my BCM94360CS2 started working. However Bluetooth is still not fully operational. It sees devices but can't seem to connect to them.

 

[maksim7293]

Well this was a bit unexpected. I noticed 4mit had a newer firmware than I did. I was on 2.04, not 2.05. After upgrading my BCM94360CS2 started working. However Bluetooth is still not fully operational. It sees devices but can't seem to connect to them.

I don't like BIOS, and it's also 2.04. I'll come home to check and unsubscribe. Does Windows OS work?

 

[Patrick545]

Might sound silly, but is your camera shutter open ?
The little sliding switch near the camera.

That's not silly, you were right. I had no idea there was a shutter. Thank you again, camera works now. Can't believe I didn't notice that.

 

[maksim7293]

Well this was a bit unexpected. I noticed 4mit had a newer firmware than I did. I was on 2.04, not 2.05. After upgrading my BCM94360CS2 started working. However Bluetooth is still not fully operational. It sees devices but can't seem to connect to them.

I was unlucky....