[Guide] Lenovo IdeaPad 700 10.12.x

[iKaito]

Read NVMe guide:
https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/

I thought the kexts @soto2080 added in the thread will take care of that since we have the exact same machine. Plus, people reported successful installation with no mention of this problem.

 

[RehabMan]

I thought the kexts @soto2080 added in the thread will take care of that since we have the exact same machine. Plus, people reported successful installation with no mention of this problem.

If you think you already met the NVMe guide requirements...

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[soto2080]

Thanks to your guide, I was finally able to boot into the installer. Thank you.
Now, I have another problem. My SSD isn't showing up in the installer. I followed the guide and placed all the kexts you added in the guide, but I can't find anything related to SSD in this thread.

Any suggestions for this problem?

Use HackrNVMeFamily with SSDT-NVMe-RP09.aml (in my clover package).

 

[iKaito]

Use HackrNVMeFamily with SSDT-NVMe-RP09.aml (in my clover package).

I already placed the entire CLOVER folder you attached in the guide and placed in my EFI.
I already have 'SSDT-NVMe-RP09.aml' in ACPI/patched and 'HackrNVMeFamily-10_12_5_spoof.kext' in kexts/other.

What am I doing wrong?

 

[RehabMan]

I already placed the entire CLOVER folder you attached in the guide and placed in my EFI.
I already have 'SSDT-NVMe-RP09.aml' in ACPI/patched and 'HackrNVMeFamily-10_12_5_spoof.kext' in kexts/other.

What am I doing wrong?

No "Problem Reporting" files attached.
Read post #12.

 

[iKaito]

Here is the CLOVER folder attached and the screenshot.

 

[RehabMan]

Here is the CLOVER folder attached and the screenshot.

No files in ACPI/origin. You forgot to press F4...
Please read FAQ, "Problem Reporting" again. Carefully.

 

[iKaito]

Sorry. Here is the origin folder after pressing F4

 

[RehabMan]

Sorry. Here is the origin folder after pressing F4

Your DSDT.aml in ACPI/patched was not created from this ACPI/origin.
Note SystemMemory address differences:

SPEEDY-NUC:patched rehabman$ diff ../origin/ ../patched/ |grep SystemMemory
<     OperationRegion (GNVS, SystemMemory, 0xBD277000, 0x0600)
>     OperationRegion (GNVS, SystemMemory, 0xBD224000, 0x0600)
<         OperationRegion (CNVS, SystemMemory, 0xBD299018, 0x00000800)
>         OperationRegion (CNVS, SystemMemory, 0xBD246018, 0x0800)

You either made changes to BIOS or hardware after you extracted/patched, or you're (incorrectly) trying to use a patched DSDT.aml from another computer.

 

[iKaito]

We used the same aml file @soto2080 used because it's the same machine and i'm positive that I didn't make any changes to the BIOS settings.

So, what should i do now?