- Joined
- Jan 19, 2018
- Messages
- 217
- Motherboard
- Gigabyte Z390UD
- CPU
- i9-9900
- Graphics
- UHD 630 + RX 580
- Mac
- Mobile Phone
Working with both display attached in cold boot?I think you can count on getting two displays working without any fuss.
Working with both display attached in cold boot?I think you can count on getting two displays working without any fuss.
Yes.Working with both display attached in cold boot?
Just can me someone explain what doing CPUFriend ? Thank you.
I know.. I know but I have old laptop therefore I askinghttps://github.com/acidanthera/CPUFriend. You do not need it.
Okay, I use it on a laptop as well.I know.. I know but I have old laptop therefore I asking
Ok so CPUFriend is only for laptops ?Okay, I use it on a laptop as well.
I have been watching OC videos to see if I should go that route. I will check out Page 90. Thanks for your feedback.As far as I know all versions of the available bios files work and after flashing the settings typically remain the same. On page 90 of this thread there are OC EFI folders
Another question regarding the dual display setup. I need both connection to be HDMI, therefore I need to purchase a converter. Is the Thunderbolt port working in Catalina, thus I can buy USB-C TB to HDMI converter? Or do I need to buy the DP over USB-C to HDMI converter (as I see Intel specifying the other port as DP)?Working with both display attached in cold boot?
Another question regarding the dual display setup. I need both connection to be HDMI, therefore I need to purchase a converter. Is the Thunderbolt port working in Catalina, thus I can buy USB-C TB to HDMI converter? Or do I need to buy the DP over USB-C to HDMI converter (as I see Intel specifying the other port as DP)?
I see the SSDT-USBC in the config.plist as UsB-C fix, is this for the TB?
Thanks in advance.