- Joined
- Mar 9, 2018
- Messages
- 13
- Motherboard
- GA Z170X-Gaming-7
- CPU
- i7-6700 3.4 GHz
- Graphics
- Sapphire Pulse Radeon RX 580
Finally I found out, that the NUC8i5BEH2 is to be reseted by removing the jumpers from the 3 Pins completely. I restored BIOS v.56 with that. After that you put the jumper either to pins 1 + 2 for „normal boot“ or to 2 + 3 for „lockdown“. Neither of those allowed me to access the BIOS. I even changed keyboards in case the „F2“-key is broken. No success...
With no Jumpers I would be able to erase the Trusted Hardware data. Do you think, this helps?
With no Jumpers I would be able to erase the Trusted Hardware data. Do you think, this helps?