[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[RehabMan]

Ok thanks. Works with 10.12 Sierra?

The problems you may encounter will depend on which laptop.

Most problems are solvable in 10.12 (and, in fact, are already accounted for in this guide), but some are not (such as the HD4400/HD4600 Safari hang).

See here for further 10.12 info: https://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/

 

[Angoo]

See here: https://www.tonymacx86.com/threads/fix-skylake-menu-bar-glitch-fix.206400/

Fix is applied already. Glitch is stayed

You forgot EmuVariableUefi-64.efi and perhaps the "RC scripts".

Not helped. Brightness level is not saving after restart. Sound level in menu bar is always at max level after restart also. Also noted that sound level in menu bar is setting at max after changing level by keys always.

Keep in mind 15-20 second delay and the fact that all assertions must clear first ('pmset -g assertions').

Not working. Laptop is sleeping after 2 mins if LID is opened (due Energy Saving settings). But it is not sleeping if LID was closed (even after 2 mins) :/ 'pmset -g assertions' give me UserIsActive=1 always. And sometimes it needs to press brightness keys to ON display after opening LID .

Your kexts are not up-to-date. Run ./download.sh and ./install_downloads.sh as per guide.

Thx, updated. Key to mute is not working still, but keys for brihtness level are fixed. Working without FN pressed. Trackpad is not empty in sysprefs now

Disable or delete the 5ghz patch in your config.plist (I will be pushing an update to the repo soon).

Need time to check. May be it is because hided ESSID

Note: Do not use trimforce. It is not needed as we already have a patch for trim in config.plist.

Disabled

 

[RehabMan]

Fix is applied already. Glitch is stayed

Is DVMT-prealloc set correctly?

Not helped. Brightness level is not saving after restart. Sound level in menu bar is always at max level after restart also.

Did you install "RC Scripts" (not something I can check for you).
Make sure you are using a good version of Clover.
Also, if you expect analysis, read post #1, "Problem Reporting".

Not working. Laptop is sleeping after 2 mins if LID is opened (due Energy Saving settings). But it is not sleeping if LID was closed (even after 2 mins) :/ 'pmset -g assertions' give me UserIsActive=1 always. And sometimes it needs to press brightness keys to ON display after opening LID .

Are BIOS settings correct with regard to "Wake on LAN" and "Wake on USB"?
Also, provide output from pmset -g assertions.

Thx, updated. Key to mute is not working still, but keys for brihtness level are fixed. Working without FN pressed. Trackpad is not empty in sysprefs now

Volume keys working, but mute not?

Disabled

Please clarify.

 

[Angoo]

Is DVMT-prealloc set correctly?

Yes, 512 Mb in bios. But about system is showing 1536 Mb

Did you install "RC Scripts" (not something I can check for you).
Make sure you are using a good version of Clover.
Also, if you expect analysis, read post #1, "Problem Reporting".

Yes, I installed the latest Clover and selected "RC Sctiprs" in install settings. New Report is attached.

Are BIOS settings correct with regard to "Wake on LAN" and "Wake on USB"?
Also, provide output from pmset -g assertions.

'Wake in LAN' and 'Wake on USB' are disabled. Output:

2016-12-14 02:27:00 +0300 
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 108(hidd): [0x0000000c0009802e] 00:05:49 UserIsActive named: "com.apple.iohideventsystem.queue.tickle" 
    Timeout will fire in 116 secs Action=TimeoutActionRelease
No kernel assertions.
Idle sleep preventers: IODisplayWrangler

So sleep is not working when I'm closing the LID. As I understand, brightness is OFF just, because I need to press brightness keys to enable the display after opening LID later.

Volume keys working, but mute not?

Yes, mute key is not working (F7). And sound level in menu bar is setting at MAX every time when I'm changing level by keys. But sound level in sysprefs is changing correctly.

 

[robi62]

The data I have for the 5x30 is that it has DP (provided by someone on this thread). Is it inaccurate?

Yes it has hdmi also vga out. Only usb 2.0 no 3.0

 

[RehabMan]

Yes, 512 Mb in bios.

Wrong. As per post #1, should be 64mb.

But about system is showing 1536 Mb

Unrelated to DVMT-prealloc.

Yes, I installed the latest Clover and selected "RC Sctiprs" in install settings. New Report is attached.

Your drivers64UEFI is not per guide. Refer to the image provided in the guide for the correct set of files.
Note: CLOVER/kexts is also not per guide.

Latest Clover is not always the best.

'Wake in LAN' and 'Wake on USB' are disabled. Output:

2016-12-14 02:27:00 +0300
Assertion status system-wide:
   BackgroundTask                 0
   ApplePushServiceTask           0
   UserIsActive                   1
   PreventUserIdleDisplaySleep    0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Listed by owning process:
   pid 108(hidd): [0x0000000c0009802e] 00:05:49 UserIsActive named: "com.apple.iohideventsystem.queue.tickle"
    Timeout will fire in 116 secs Action=TimeoutActionRelease
No kernel assertions.
Idle sleep preventers: IODisplayWrangler

So sleep is not working when I'm closing the LID.

Be patient.
Also, make sure BIOS is up-to-date.
You might need to debug your _LID device in DSDT.
Look at your system log for clues as to why it is not sleeping (or is it instantly waking?)

Yes, mute key is not working (F7). And sound level in menu bar is setting at MAX every time when I'm changing level by keys. But sound level in sysprefs is changing correctly.

From where did you download macOS?

 

[RehabMan]

Yes it has hdmi also vga out. Only usb 2.0 no 3.0

Some models may have Renasas USB3.
I changed the repo to assume 5x30m has HDMI.

 

[Angoo]

From where did you download macOS?

AppSore, but originally was installed with using Unibeast.

Your drivers64UEFI is not per guide. Refer to the image provided in the guide for the correct set of files.
Note: CLOVER/kexts is also not per guide.

Latest Clover is not always the best.

It seems that new drivers in drivers64UEFI were added after updating Clover. But what is wrong with empty CLOVER/kexts ?)

 

[Angoo]

Wrong. As per post #1, should be 64mb.

Nothing changed. Also have logo glitch and 1536 Mb in about system window.

 

[RehabMan]

Nothing changed. Also have logo glitch and 1536 Mb in about system window.

Show photos of your BIOS settings.
Make sure BIOS is up-to-date.
What do you mean by "logo glitch"? (that could mean one of two different things).
1536 is normal.

You seem to have unique problems not reported by anyone else...