[Guide] HackrNVMeFamily co-existence with IONVMeFamily using class-code spoof

[RehabMan]

Four months ago I have success installed Sierra 10.12.4, but now same Board Fresh install on Z170X-UD3, M2 960pro 512GB on 10.12.6 have a error with trying to boot OS
View attachment 273576

Read post #1, "Problem Reporting" (you neglected to provide an image from Windows Device Manager)

 

[osaj]

Read post #1, "Problem Reporting" (you neglected to provide an image from Windows Device Manager)

Bios device name from windows device manager, and what I see next on IOReg.

 

[RehabMan]

Bios device name from windows device manager, and what I see next on IOReg.

Since you're booting from some other device just fine...

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[osaj]

I do not know why I should also ask for thread for laptop!
In this thread I have read several times post #1, I am curently on HDD 10.12.6 I follow step by step, patched SSDT_NVMe-Pcc.aml, Changes _DSM to XDSM and Creating HackrNVMeFamily* but my OS not detected yet
I have tried to boot from USB Clover it is same error on boot
Now with 10.12.6 running smoothly 7700K and HD630 without FakeID, only NVMe not detected!
Anyway Thanks RehabMan

 

[RehabMan]

I do not know why I should also ask for thread for laptop!
In this thread I have read several times post #1, I am curently on HDD 10.12.6 I follow step by step, patched SSDT_NVMe-Pcc.aml, Changes _DSM to XDSM and Creating HackrNVMeFamily* but my OS not detected yet
I have tried to boot from USB Clover it is same error on boot
Now with 10.12.6 running smoothly 7700K and HD630 without FakeID, only NVMe not detected!
Anyway Thanks RehabMan

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[osaj]

My bad : (___ I have the patch incorrectly Creating SSDT_NVMe-Pcc.aml !! Now working well
Thank you again RehabMan

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[RehabMan]

My bad : (___ I have the patch incorrectly Creating SSDT_NVMe-Pcc.aml !! Now working well
Thank you again RehabMan

Nice to hear you have it working.

 

[ivoryblade]

Use a plist editor (such as Xcode or PlistEdit Pro) to make the appropriate entries.
The patches you show are not related to this guide or your issue.

So I made 4 configs with different patches (see attachment). Is it correct?

 

[RehabMan]

So I made 4 configs with different patches (see attachment). Is it correct?

This guide does not use config.plist/.../KextsToPatch.
Read post #1.

If you're referring to special patches required by various specific SSDs, not possible to read the images you attached.
If you have a question regarding your patches entered, you must attach your config.plist file itself.

 

[Jessekazam]

Been trying to get my Hackintosh to boot for a few days now.

Originally I had a Kernel panic (attached Picture). RehabMan mentioned it could be related to not having that Class-code spoof for my HackrNVMEFamily.kext so I am trying to use a USB to install correct spoof and kext and use that to boot into my NVME so I can add the spoof and kext there.

When I try booting into NVMe from USB Clover the kernel panic goes away and about half way through the boot it just shows a circle with a line through it.

Thanks to this awesome community for help!