The Pc still not recognize the disk for disk utility formatting in the installer.. Can u help me ?
PCIROOT(0)#PCI(1D00)#PCI(0000)
ACPI(_SB_)#ACPI(PCI0)#ACPI(RP09)#ACPI(PXSX)
----
\_SB.PCI0.RP09.PXSX
Device (_SB.PCI0.RP09.PXSX)
{
Name (_ADR, Zero) // _ADR: Address
}
Okay sorry but i cant login into my pcYour SSDT is wrong.
No need for this code:
Code:Device (_SB.PCI0.RP09.PXSX) { Name (_ADR, Zero) // _ADR: Address }
Also, next time, please read post #1, "Problem Reporting".
Okay sorry but i cant login into my pc
Anyway i changed this and i tryed to create Hackrnvmefamily kext for 10.12.3 (the osx v i would like to install) and i placed it into kext on the efi folder, but i still cannot recognize my ssd to install the osx into
This is the Efi folder so u can give it a check! Thanks
I need to fix that so.Your SSDT-NVMe-Pcc.aml is still wrong, in the same way I wrote in post #501.
Also, your HackrNVMeFamily-10_12_3.kext is not correct (it is actually 10.12.4 vanilla kext).
I need to fix that so.
How i can fix that? I read the guide carefully but i cant login into my pc so im with a friend pc .. And im so bad at this sorry
Anyway what i still missing on ?
why exactly the above numbers (5f44534d / 5844534d)? what do they mean?
u430:~ Admin$ echo -n 5f44534d|xxd -r -p|xxd
0000000: 5f44 534d _DSM
u430:~ Admin$ echo -n 5844534d|xxd -r -p|xxd
0000000: 5844 534d XDSM
I am a little stuck on this one and was hoping somebody (RehabMan!?) might have an idea of what the problem may be.
I have 3 NVMe SSDs: a Samsung 950 and 2x Intel 750s. I've got the Samsung and one of the Intels working, no problem! However, I can't get Sierra to recognize one of the Intels for reasons unknown.
I used these addresses (from Win10) in SSDT-NVMe-Pcc.aml:
\_SB.PCI0.BR1B.H000 (Intel 750 #1)
\_SB.PCI0.BR2C.H000 (Intel 750 #2) (* This one not recognized)
\_SB.PCI0.BR3A.H000 (Samsung 950) (Currently the Win10 boot & not even really needed to be visible on the mac side)
Very grateful for any suggestions. Attaching SSDT-NVMe-Pcc.aml just in case.