Question: If I wanted to switch the 950 Pro out with a 960 Pro, then do you know if that would require any patch/config changes or would it be acceptable for me to simply clone the 950 drive via CCC and write the resulting image onto the 960? Or would it be necessary/preferable to do a fresh USB install via Unibeast?
I would ultimately aim for a 960 Pro x 3 setup, with my current PCI port dedicated to OS X, and the two m.2 ports dedicated to a hardware RAID driven by the BIOS installed on my mobo for a super-fast Windows 10 setup; I assume I would need to change a few settings in BIOS each time I wanted to change boots, but otherwise is this setup feasible/practical? I'd probably also want to install Parallels on my OS X SSD just to have easy access to Windows from that boot as well, so I'd likely go for a single 1TB 960 Pro (to run OS X + Windows 10 via Parallels) and two 512GB 960 Pro's (to run Windows 10 via NVMe BIOS RAID).
Thanks again Rehabman for your help.