Need help in resolving the sleep issue please.
I have converted a Lenovo tower into Hackintosh, using it from a past 2 years. Everything works except sleep.
Sleep use to work fine on clover Boot loader but since the day I switched to opencore sleep has never worked.
Using HDMI port to drive my dell monitor.
Currently using MacBook Pro 14.3 as my SMBIOS and everything works except sleep. When the machine is manually put into sleep it goes to sleep for couple of second and wakes up immediately and black screen after that.
As per the opencore suggestion, if I use the SMBIOS iMac 18.1 no/black screen after boot. I tried the ports mapping thing and got the screen to work after boot on SMBIOS iMac 18.1 but the system is not stable at all using this profile and Intel bluetooth doesn't work when iMac 18.1 profile is used. But the wired thing is the machine goes to sleep and stays in sleep but again no/black screen after wakeup.
HW config.
Intel i3 7100 3.9Gz (HD630 IGPU)
16GB RAM
120GB SSD
1TB Spinning disc.
Stock Intel Wifi and bluetooth works flow less.
Dell Monitor connected via HDMI monitor.
Currently on the latest version on Big Sur, i have not changed any HW config on this tower except adding an SSD. Everything works and system is super stable except sleep function.
View attachment 531785View attachment 531782