[Guide] Booting the OS X installer on LAPTOPS with Clover

[RehabMan]

I have set up my usb according to the guide and when i try and boot into the installer i get stuck at the apple logo

I have a lenovo U530 touch
i7 4500u processor
8gb ram
intel Hd 4400/ Nvidia GT 730

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[ThatRedstoneGuy]

I know this is outdated, but I finished the USB and I tried booting to the install but it came up as a prohibited sign.

 

[ThatRedstoneGuy]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover LEGACY

I have finished all of the steps that were provided and I successfully booted up Clover. From there I tried booting to the install, and it load up as well. A little bit more than half-way through the install loading it just cuts out and shows a prohibited symbol.

 

[RehabMan]

I know this is outdated, but I finished the USB and I tried booting to the install but it came up as a prohibited sign.

Nothing "outdated" about this guide...

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

Also, please fill out your profile as requested in post #1 before replying.

 

[RehabMan]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover LEGACY

I have finished all of the steps that were provided and I successfully booted up Clover. From there I tried booting to the install, and it load up as well. A little bit more than half-way through the install loading it just cuts out and shows a prohibited symbol.

I took a quick look at your EFI.zip. You did not follow the guide.

 

[ThatRedstoneGuy]

I took a quick look at your EFI.zip. You did not follow the guide.

How so? I followed it step by step.... So I thought

 

[RehabMan]

How so? I followed it step by step.... So I thought

CLOVER/kexts is not even close to the recommendation in the guide. I stopped looking at that point...

Also:
- your profile is not filled out as requested in the guide
- drivers64UEFI is not as per guide (assuming you're booting UEFI, with a UEFI capable computer)
- config.plist is for an HD3000 1366x768 computer (so maybe not UEFI). I can't tell if this is correct as your profile is not filled out.

 

[ThatRedstoneGuy]

What's the issue?
Kexts:

AppleIntelE1000e.kext
FakeSMC.kext
GenericUSBXHCI.kext
IntelMausiEthernet.kext
RealtekRTL8100.kext
RealtekRTL8111.kext
VoodooPS2Controller.kext​

Are these the issue:

FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_LPCSensors.kext​

 

[RehabMan]

What's the issue?
Kexts:

AppleIntelE1000e.kext
FakeSMC.kext
GenericUSBXHCI.kext
IntelMausiEthernet.kext
RealtekRTL8100.kext
RealtekRTL8111.kext
VoodooPS2Controller.kext​

Are these the issue:

FakeSMC_ACPISensors.kext
FakeSMC_CPUSensors.kext
FakeSMC_GPUSensors.kext
FakeSMC_LPCSensors.kext​

Post #1 is very clear on the kexts that should be placed in EFI/Clover/kexts/Other. There is even an image provided of what it should look like.

And it is also very clear on where each kext should come from.

Please fix your profile before your next reply.

 

[ThatRedstoneGuy]

Post #1 is very clear on the kexts that should be placed in EFI/Clover/kexts/Other. There is even an image provided of what it should look like.

And it is also very clear on where each kext should come from.

Please fix your profile before your next reply.

Just fixed the profile. This should be a bit better. Sorry for the confusion.