- Joined
- Feb 22, 2019
- Messages
- 45
- Motherboard
- Asus Vivobook X542UA
- CPU
- i5-8250U
- Graphics
- UHD 620
- Mobile Phone
Hello, everybody!
I have ASUS Vivobook X542UA, MacOS Mojave 10.14.5
My hardware is:
- Intel Core i5-8250U
- Graphics Intel UHD 620
- 16Gb DDR4
- m2 SSD WD Blue 250Gb SATA
- SATA HDD 1Tb
- Realtek ALC294 codec
- WiFi+BT replaced with Broadcom BCM94352
- screen replaced with B156HAN01.1 - it's a cheap IPS, gamut is 72% of sRGB. Only 6 bits/pixel is available (262 thousands of colors only), but it's much more better, than native TN.
What is DOES NOT work:
- Internal microphone - when no headphones connected, in sound devices appears 2 * Line In, both not working. When headphones + ext. mic connected - everything is working.
- GPIO pinning of touchpad - in my case it's work only in polling mode. All gestures works.
In attached files you can find my EFI folder and kexts you should install to /L/E. You must generate your own serial numbers and place them to config.plist (SMBIOS section) using PlistEdit Pro. You can generate these numbers in Clover Configurator.
Credits to Feartech and ben9923 - they help me a lot.
UPD 7/17/19: Updated Clover and some kexts.
UPD 7/26/19: Added USB Type-C support
Download AsusSMC here, there is own daemon, required to install.
I have ASUS Vivobook X542UA, MacOS Mojave 10.14.5
My hardware is:
- Intel Core i5-8250U
- Graphics Intel UHD 620
- 16Gb DDR4
- m2 SSD WD Blue 250Gb SATA
- SATA HDD 1Tb
- Realtek ALC294 codec
- WiFi+BT replaced with Broadcom BCM94352
- screen replaced with B156HAN01.1 - it's a cheap IPS, gamut is 72% of sRGB. Only 6 bits/pixel is available (262 thousands of colors only), but it's much more better, than native TN.
What is DOES NOT work:
- Internal microphone - when no headphones connected, in sound devices appears 2 * Line In, both not working. When headphones + ext. mic connected - everything is working.
- GPIO pinning of touchpad - in my case it's work only in polling mode. All gestures works.
In attached files you can find my EFI folder and kexts you should install to /L/E. You must generate your own serial numbers and place them to config.plist (SMBIOS section) using PlistEdit Pro. You can generate these numbers in Clover Configurator.
Credits to Feartech and ben9923 - they help me a lot.
UPD 7/17/19: Updated Clover and some kexts.
UPD 7/26/19: Added USB Type-C support
Download AsusSMC here, there is own daemon, required to install.
Attachments
Last edited: