Hi RehabMan, Hi Guys,
I need your help. I dont know, what am I doing wrong with my USB injection? Ive tried to capture every detail, therefore quite some long post around! Sorry!!!
Im using an
Asrock X99M Extreme4 which is quit rare to what I know at the moment (no other hackintosh around in our community or others so fare?!)
1) DSDT original finds USB2/3 directly under XHCI/RHUB/ - see attached DSDT.aml in zip-File and Screenshot, 14 USB2.0 (4 IO-shield, 10 internal), 6 USB3.0 (4 IO-shield, 2 internal).
conclusion 1)
all Ports under XHCI to my knowledge, no Ports under EHC1 or EHC2. Under EHC1 and EHC2 I find /HUBN/PRO1/PR11-PR18 and PR11-16. quite common for x99 to what is described here and in the different readme files of your usbinjectall.kext etc.
question 1) What is a PR Device?
2) DPCI Manager tells my my Wellsburg USB xHCI Host controller Device-ID which is: 8086, 8D31:
USB2 Host Controller #1 and #2: 8086:8D26 and :8D2D
conclusion 2) also quite common for x99
3) Clover Config DSDT/kext patches
My clover.config where I used the following DSDT and kext patches is attached in the zip-file.
clover config DSDT Patch (code)
Code:
<dict>
<key>Comment</key>
<string>change EHC1 to EH01</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMQ==
</data>
<key>Replace</key>
<data>
RUgwMQ==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change XHCI to XHC</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
WEhDSQ==
</data>
<key>Replace</key>
<data>
WEhDXw==
</data>
</dict>
<dict>
<key>Comment</key>
<string>change EHC2 to EH02</string>
<key>Disabled</key>
<false/>
<key>Find</key>
<data>
RUhDMg==
</data>
<key>Replace</key>
<data>
RUgwMg==
</data>
</dict>
I've disable the clover config usblimit kext patch as recommended as i would like to route usb2.0 to EHCI.
4) _OSI and Windows version checks
I didnt't patched my DSDT for XOSI so fare, as I hoped to patch as little as possible.
5) XWAK, XSEL, and ESEL
As in 4), all is present in DSDT, no patches so fare. XWAK does include so code, maybe I will use it to find out if that fixes my hibernation problems.
6) USBInjectAll, FakePCIID_XHCIMux and PCIID Kext, X99 Injector kext
in the zip, Ive added my x99 injector kext which does not help me to get my usb3.0 ports work with 3.0 speed. every port is fixed at 2.0 speed. In addition, in the zip I used the USBInjectAll.kext and the FakePCIID_XHCIMux and PCIID Kext to route the usb2.0 part from XHCI to EHCI.
I've used the pjalm injector as the basis and added my ports and my device id for my xhci usb controller. Also I did this with the USBInjectAll.kext as the basis, no difference.
question 6) how to check if usb2.0 ports are routed to EH01 and EH02?
Can someone plz look into the x99_injector and tell me if this is correct what I have done?
I have guessed which ports are internal (3) and external (255) as I dont have yosemite or windows installed to map the ports (I would guess that this is not the problem in the first step).
5) verification:
after clover config patches and USBInjectAll.kext (with fakepciID and fakepciid_xhcimux) my IORegistry Explorer finds the patches for xhci to xhc and ehc1 to eh01 and ehc2 to eh02 (ioreg in attachment)
the ports by itself are correct I guess.
can someone plz help me and tell me what I'm doing wrong????
thank you very much for reading till the end, I know this is a long post.
all the files requested in the zip attached.